Melt Coating Wholesale

2-Methylimidazole Cas 693-98-1

• Place of origin:  

  China

coating. It is hygroscopic, soluble in water and alcohol, and sparingly soluble in benzene. It is irritating and corrosive to skin and mucous membranes. This product is used in the synthesis of metronidazole and dimethoazole, and is also a curing agent for epoxy resins. Items Standard Appearance White crystal or white crystal powder Purity ≥99.00％(GC) Melting Point 142.0-146.0℃ Water ≤0.5

[Related Keywords : CAS 693-98-1, 2-Methylimidazole]

Aluminum Insulated Wire Scrap 6063 Grade 99% Al Content 25kg Bale

• Place of origin:  

  Thailand

Length: 3-6.5 m 3. Normal anodizing thickness: 8 to 12 micro 4. Normal powder coating thickness: 60 - 100 micro 5. Tensile Strength: ≥160 MPa 6. Yield strength: ≥110 MPa 7. Extensibility: ≥8% 8. Hardness (HW): ≥8 ITME STANDARD % TEST RESULT% Si 6.5-7.5 6.73 Fe 0.12 max 0.047 Cu 0.1 max 0.0022 Mn 0.05 max 0.013 Mg 0.30-0.45 0.381 Zn 0.05 max 0.016 Ti 0.2 max 0.14 Al Balance 92.65

[Related Keywords : Aluminum scrap]

Polycarbonate Single Layer Sheets Cleanlight

• Place of origin:  

  Korea

melt down in a rather flexible manner but as the flames spread apart, it will not contribute to the spreading of the fire. 3. SPECIFICATION *Customized production is available after consultations on other colors and sizes than those above. *Types of emboss - FOG - Water Drop - Plaid *Functional products - HARD COATING - SELF CLEANING COATING - ANTI STATIC COATING 4. USAGE The outer walls of build

[Related Keywords : polycarbonate sheets]

P.P, P.E Tarpaulin

• Place of origin:  

  Korea

Woven fabric's weaving density - 7~14 plies/inch Woven fabric's denier - 700 ~ 1400 denier Coating thickness - 20~50 mic. Features It satisfies water and wind resistance properties as the raw material of the same quality is melted and applied on P.P. or P.E. woven fabric, and products of various colors can be produced using colorful pigments when coating. Use chemical products, fertilizers, feed

[Related Keywords : Tarpaulin]

Fine Bone Charcoal Raw Material Wholesale

• Min. Order:  

  1 Ton

• Price:  

  US$ 850

• Place of origin:  

  China

melting point is 1670°C (3038°F). Most bones are preserved with their cellular structure through firing. Ashes have various uses, such as fertilizer, polishing agent, or bone porcelain production. Additionally, ashes can be used as a protective coating for metal equipment, tools, or as molds for flooring. In this context, ashes have been widely recognized as a sealant for gaps or cracks. Bone p

[Related Keywords : natural bone ash powder, Bone charcoal]

TXC- Optical Fiber Splice Closure Sealing Heat Shrink Tube

• Min. Order:  

  1000 Unit

• Price:  

  US$ 0.8 ~ 1.7

• Place of origin:  

  China

melt adhesive EVA adopts either a spiral or direct coating process, both of which have the functions of bonding and waterproof sealing. Compared with the direct coating type, the spiral coating type has no risk of slippage during construction, and has better air retention and sealing performance. Its high Shrinkage rate performance can closely adhere to irregular interfaces and large-sized connec

[Related Keywords : Optical fiber splice tube, Fiber Splice Closures, Fiber Optic Terminal Box, Optical fiber sleeve]

1,3-Cyclopentadiene(CAS#542-92-7)

• Place of origin:  

  China

is carried out at a reaction temperature of 600 ℃ and a pressure of 2666-3333Pa to produce cyclopentadiene. In addition, 1,4-pentadiene and 1,3-pentadiene can be used as raw materials to produce cyclopentadiene. purpose Mainly used for manufacturing diene pesticides, plastics, coatings, Used for medications, fragrances, synthetic rubber, petroleum resins, high-energy fuels, etc.

[Related Keywords : 1 3-Cyclopentadiene]

Tricalcium Phosphate (TCP)

• Min. Order:  

  1 MT

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  20 MT per Day

melted in hydrochloric acid and nitric acid but little melted in citric acid and acetic acid. RECOMMENDED USAGE For foodstuffs : - Nutrition enrichment and quality improvement of bread, confectionery, cereal, grain products, etc.. - Ingredient of yeast food. Gelling agent of carrageenan, alginates. For industrial use : - Supplementary agent of detergent. - Ingredient of ceramic ware For pha

[Related Keywords : TCP, Tricalcium Phosphate, Phosphate, Food Additives]

Copper Alkaline for Brush Platingoil Pipe Thread Copper Plating Equipment for Casing, Tubing and Cou

• Place of origin:  

  China

melting point lead-tin-based binary or even multi-element alloy coatings should not be used. Copper plating has become the first choice for improving thread anti-sticking performance. Because the copper plating layer has the characteristics of high melting point (1083°C), low hardness, good ductility, and large difference in lattice parameters from steel materials, copper plating on the thread s

[Related Keywords : Copper plating machine, copper plating on thread, copper plated casing, copper plated tubing]

Eleven Huesday VDRN Glow Sun Lotion & Glow Rice Mask

• Place of origin:  

  Korea

coating that tightly seals in the skin, ensuring perfect adhesion of key ingredients. 3. Uniquely firm and elastic! An ultra-adherent texture that fills every gap. 4. Apply and peel off—done. One layer is all it takes to reveal firm, glowing skin. [Key Ingredients] - Rice PDRN ,Rice Extract ,Rice Ferment Complex, Jojoba Seed Oil, PHA+LHA [Features] - A high-moisture, radiant layer that locks in

[Related Keywords : Rice PDRN, Rice Extract, Ferment Complex]

RFID Converting Machine

0.05 to 0.45mm Flat bed diecutting pitch: minimum 160 to maximum 320mm Maximum speed: maximum 90m/minutes Inlay(Pet) type: 13.56MHz (ISO 15693), 900MHz (Gen2) Function: 7 kinds Hot melt glue coating Inkjet printer Servo motor PLC &motion control + 12 inches color touchscreen RFID Label Partner Company Alien TechnologyTM Certified RFID Label Avery Dennison qualified RFID Label Partner

[Related Keywords : RFID, INLAY, CONVERTING, TRANSFER]

Ysl High Shine Lipstick, Full Coverage Foundation, Volumizing Mascara

• Place of origin:  

  France

• Supply Ability:  

  40,000 sets per week

coats all lashes and holds maximal formula for high volume in just one swipe. The formula lets you wear any level of volume from one to five strokes. Lash Clash is outfitted in sleek Yves Saint Laurent packaging to become the ultimate luxury must-have. 2. THE BOLD HIGH PIGMENT LIPSTICK What it is :Bold color in one swipe. Ultra-pigmented satin lipstick with buildable shine finish. What it does

[Related Keywords : LASH CLASH VOLUME MASCARA]

Coated Cysteamine Hydrochloride 25% Swine Livestock and Poultry Beef Cattle Fattening Cattle

• Min. Order:  

  1000 Kilogram

• Price:  

  US$ 4.6 ~ 4.9

• Place of origin:  

  China

• Supply Ability:  

  60000kg per Month

Coated cysteamine hydrochloride 25 % The usual cysteamine hydrochloride has many problems,such as: Causes gastric ulcers,decrease of feed intake,vomiting; Reaction with other raw materials,easy to be oxidized and lose activity to change color; Low melting point,easy to decompose,and inevitable wastage in feed processing. Through the process of intelligent coating technology, the coating materi

[Related Keywords : coated cysteamine, RP cysteamine hcl, rumen bypass cysteamine, coated cysteamine hcl]

Chlorosulphonated Polyethylene Rubber (CSM)

• Min. Order:  

  24 Metric Ton

• Price:  

  US$ 700 ~ 1350

• Place of origin:  

  South Africa

• Supply Ability:  

  6500 per month

coating, industrial hoses, industrial hard rubber products CSM3304 33~37 0.8~1.2 41~50 Low Mooney viscosity of CSM3305 CSM3308 33~37 0.8~1.2 81~90 High Mooney viscosity of CSM3305 CSM4010 40~43 0.8~1.2 – Excellent solubility, low solution viscosity, good oil resistance Coatings, adhesives, oil-resistant products, etc. CSM2300 23~27 0.8~1.2 41~50 Thermoplastic, can be used in uncured state Water

[Related Keywords : Chlorosulphonated]

OEM Stainless Steel Investment Precision Casting with Machining

• Place of origin:  

  China

coated with a ceramic material to form a ceramic shell or mold. The ceramic shell is hardened through drying or heat treatment, creating a strong and heat-resistant mold. Once the mold is ready, the wax or plastic pattern inside is melted or burned out, leaving a cavity that corresponds to the intended shape of the component. Molten metal is then poured into the cavity through the gating system.

[Related Keywords : Precision Casting]