Preheating Wholesale

Wave Soldering Tin Furnace Preheat Zone Test Glass with Scale

• Min. Order:  

  1 Piece

• Price:  

  US$ 60 ~ 180

• Place of origin:  

  China

• Supply Ability:  

  600 Pieces Per Month

Product DescriptionOur wave soldering preheating zone high-temperature test glass is specially designed for measuring the peak flatness and the tin temperature width measurement special high-temperature glass. It can also test the distribution of test spray flux with thermal paper. Not only can it withstand the change of temperature difference between cold and hot fusion, but also it will not bre

[Related Keywords : Preheat Zone Test Glass, Tin Furnace test glass, high temperature glass]

Thermal Efficiency Improving Power Station Gas Fired Boiler Boiler Parts Air Preheater Made in China

• Min. Order:  

  1 Unit

• Price:  

  US$ 500 ~ 1999

• Place of origin:  

  China

Descriptions: "An air preheater (APH) is any device designed to heat air before another process (for example, combustion in a boiler) with the primary objective of increasing the thermal efficiency of the process. They may be used alone or to replace a recuperative heat system or to replace a steam coil. There are two types of air preheaters for use in steam generators in thermal power station

[Related Keywords : Boiler Air Preheaters]

Induction Preheating

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

preheated before welding. And this preheating before welding job is always done at the outside field. Thus, there actually exist great demands in the industry for a small-sized flexible pre-heat treatment in welding. More specically, the tool for this kind of preheat treatment must be equipped with an air cooling system ( so that it will not need a water source), a flexible heating cable for diff

[Related Keywords : induction heating power s]

Dental Lab Burnout Furnace/ Preheating Furnace

automatically, and the temperature and time control are very accurate. Voltage: 220V/ 110V Power: 4000W Maximum temperature: 1000 C Chamber Dimensions: 300x200x120(mm) Shipping Dimensions: 830x540x880(mm） Shipping Weight: 120kg key words: burnout furnace, preheating furnace, dental lab equipment, furnace, preheating oven, burnout oven, kiln, medical, dental laboratory, jewelry

[Related Keywords : burnout furnace, preheating furnace, dental lab equipment, furnace]

220V Engine Preheaters

• Min. Order:  

  108 pcs

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  10000 pcs/month

Product Name: Small Car Item No: WT-8007 Rated Voltage: 220V-240V Rated Power: 2000W Double Thermostats: 85℃ Pump Lift: >90cm Pump Capacity: 8L/minute Pump Life: >2000hours Weight: 1.3 kgs Dimension: 18.5*9*8 cm

[Related Keywords : 220V Engine Preheaters, Preheaters, Preheater, engine heater]

Steam Car Wash Machine (CL1700- Diesel Model)

• Place of origin:  

  Korea

Specifications Dimension 500(W) x 900(L) x 850(H) Weight 95 Kgs Power DC12V / 40AH(Car battery) or 220V / 50-60AH Fuel KEROSENE OR LIGHT OIL Steam Pressure 8-9kgh/cm2 Steam Temperature 60-120°C(212F) Preheating time 5 min Water tank capacity 20 liters Oil tank capacity 20 liters Length of a hose 10 m Thermal resistance -200°C~ +260°C Quantity of pump emission 3 liters(min) / 30kgs Acc

[Related Keywords : car wash, car wash machine, steam car wash, car cleaning]

Brazing Gas Torch 'GT-2504'

• Place of origin:  

  Korea

for welding or repair of heater/air-conditioner part. 2. ETC... 9) Features 1. High quality brazing kit complete with torch, rods 3 ea and flux 2. Ultralight compact design 3. Patented system allows appliance to be used safely at any angle after preheating for 2 minutes 4. Convenient and easy to use 5. Multi-function for use in home and workshop 6. Concentrated flame with 1,600 centigrade

[Related Keywords : Brazing torch, Plumbing torch, Heating torch, HVAC]

Aluminum A7 Ingot

• Min. Order:  

  500 Metric Ton

• Price:  

  US$ 2200 ~ 2500

• Place of origin:  

  South Africa

• Supply Ability:  

  30,000 MT per month

preheat and dry ingot before charging it into the furnace. As a guide this is done by preheating the ingot to 400°C for at least 4 hours. Heating for 2 hours per 25mm section thickness is typically required to bring Aluminium to a uniform temperature. Physical Quality Ingots shall have smooth finish on bottom and side surfaces with no included or adhered refractory coating material. Surfaces sh

[Related Keywords : Aluminum Ingot]

MDO PE Film Custom Manufacturer Professional PE Film Solution Provider

• Min. Order:  

  3 Ton

• Price:  

  US$ 5000

• Place of origin:  

  China

• Supply Ability:  

  3000tons per month

preheating, where the PE is fed into the stretching unit and evenly warmed to the desired temperature, which is slightly below the melting point. Then is followed by machine direction orientation, where the film is stretched between a series of rollers that are revolving at different speeds. The MDO PE film will be stretched several times which gives it a shrink index. This shrink value determine

[Related Keywords : MDO PE film Manufacturer]

UV Ballast Electronic 2.1-2.2A 320W Lamp Electronic Ballasts for Gphva1554t5l High Output UVC Lamp T

• Min. Order:  

  100 Piece

• Price:  

  US$ 8 ~ 12

• Place of origin:  

  China

• Supply Ability:  

  10000000 Pieces /Month

Electronic Ballast for High Power 320W Gph1554t6l UV LampT5 Electronic Ballast for UV Lamp H Type U Type Lamp Tube Plastic ShellElectronic Ballast for 2 PCS 35W~75W UV LampsUV Ballast Super Cost-Performance Sx08-800-100 Electronic Ballast Ballasts for High Output or Standard Output UV Lamps Electronic Ballast for High Output or Standard output UV lamps Preheat start Ballast SX05-800-2/75U AC220-2

[Related Keywords : Lamp Ballasts, lighting ballast, ballast for lights, Lamp Electronic Ballasts]

Honey & Seeds Filled Korean Pancake (Hotteok)

• Place of origin:  

  Korea

Preheat the air fryer to 180°C, place the frozen product in the basket, and cook for approximately 4-5 minutes(based on 1 piece). Oven: Preheat the oven to 180°C, place the frozen product in it, and bake for about 8-10 minutes. Frozen Food Freezing and Thawing Tips: Having Frozen food in the freezer can help with your evening meal after work! Cooking without thawing can change the taste of your

[Related Keywords : hotteok, korean food]

Hot-selling ZK61 Plates On Sale with Good Quality

• Min. Order:  

  20 Kilogram

• Price:  

  US$ 50

• Place of origin:  

  China

preheated to a specific temperature to ensure proper plasticity and formability. Extrusion: The heated billets are forced through a die to shape them into rods. This process can be done using direct or indirect extrusion techniques. Cooling and Heat Treatment: After extrusion, the rods are cooled and may undergo heat treatment processes such as solution heat treatment and aging to enhance their m

[Related Keywords : magnesium plate]

Coffee Maker

• Min. Order:  

  500 Set

• Price:  

  US$ 40

• Place of origin:  

  China

• Supply Ability:  

  20000 pcs/month

automatically Die-casting aluminum alloy boiler Aluminum alloy filter holder attached with dual-stainless filter to improve coffee quality Can use for coffee pod or ground coffee Can make coffee or steam conveniently Safe and reliable,with overheating and overpressure protected device Detachable frothing nozzle and drip trayfor easy cleaning Durable stainless cup mat for coffee cups preheating

[Related Keywords : Coffee Maker, Coffee machine, Home appliance, Kitchen appliance]

800PSI 4 Inch SS Natural Gas Y Strainer Thread End NPT

• Place of origin:  

  China

preheating is required before welding or further heating is required after welding (D series strainer), it is recommended to remove the gaskets before heating. Operation and maintenance of the natural gas strainer After the system has been operating for an initial period of time (generally no more than one week), it should be cleaned to remove impurities and dirt that have accumulated on the scre

[Related Keywords : Natural Gas Y Strainer]

102kw ST-YN-1212-102 Diesel Powered Mobile Air Compressor for Engineering

• Place of origin:  

  China

preheating system, oil and gas separation system, control system and other parts . Among them, the diesel engine provides power for the entire equipment, the compressor is responsible for compressing the air, the cooling system cools the compressed air, the oil separator is used to separate oil molecules in the compressed air, and the control system is responsible for starting, stopping and contr

[Related Keywords : air compressor]