There are 60 Gpon from 26 suppliers on EC21.com
Related Searches : fiber optic , patch cord , fiber , fiber optic patch cord , media converter , sfp , fusion splicer
Supplier Info.
Report Item
Your report on Product(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
Part No. | Data | Laser | Fiber | Distance | Optical | Temp. | DDMI | |
Rate | Type | Interface | ||||||
TSP-EB66-43DIS | 1.25Gbps | DFB | Single-mode | 20KM | SC/UPC | I | Yes | |
TSP-EB66-43DCS | 1.25Gbps | DFB | Single-mode | 20KM | SC/UPC | C | Yes | |
TSP-EB66-43NIS | 1.25Gbps | DFB | Single-mode | 20KM | SC/UPC | I | No | |
TSP-EB66-43NCS | 1.25Gbps | DFB | Single-mode | 20KM | SC/UPC | C | No | |
Feature | Standard | Performance | |
Electrostatic Discharge | MIL-STD-883G | Class 1C (>1000 V) | |
(ESD) to the | Method 3015.7 | ||
Electrical Pins | |||
Electrostatic Discharge | EN 55024:1998+A1+A2 | Compliant with standards | |
to the enclosure | IEC-61000-4-2 | ||
GR-1089-CORE | |||
Electromagnetic | FCC Part 15 Class B | Compliant with standards Noise | |
Interference (EMI) | EN55022:2006 | frequency range: 30 | |
CISPR 22B :2006 | MHz to 6 GHz. Good system | ||
VCCI Class B | EMI design practice required to achieve | ||
Class B margins. | |||
System margins depend on customer | |||
host board and chassis design. | |||
Immunity | EN 55024:1998+A1+A2 | Compliant with standards. | |
IEC 61000-4-3 | 1kHz sine-wave, 80% AM, | ||
from 80 MHz to 1 GHz. No effect on | |||
transmitter/receiver performance is | |||
detectable between these limits. | |||
RoHS6 | 2002/95/EC 4.1&4.2 | Compliant with standards*note1 | |
2005/747/EC 5&7&13 | |||
Parameter | Symbol | Min | Max | Unit | |
Storage Temperature | TS | -40 | 85 | °C | |
Supply Voltage | VCC | 0 | 4 | V | |
Operating Relative Humidity | OH | 5 | 95 | % | |
Parameter | Symbol | Min | Typical | Max | Unit | |
Operating Case Temperature | I-TEMP | -40 | 85 | °C | ||
C-TEMP | -5 | 70 | °C | |||
Power Supply Voltage | VCC | 3.13 | 3.3 | 3.47 | V | |
Bit Rate | 1.25 | Gbps | ||||
Parameter | Symbol | Min | Typ. | Max | Unit | Notes | |
Transmitter | |||||||
LVPECL Inputs Voltage (Differential) | Vin | 200 | 1600 | mVpp | AC coupled inputs | ||
Input Impedance (Differential) | Zin | 90 | 100 | 110 | ohm | ||
Tx_DISABLE Input Voltage – High | 2.0 | VCC | V | ||||
Tx_DISABLE Input Voltage – Low | 0 | 0.8 | V | ||||
Tx_FAULT Output Voltage – High | 2.4 | VCC | V | ||||
Tx_FAULT Output Voltage – Low | 0 | 0.4 | V | ||||
Receiver | |||||||
LVPECL Outputs Voltage | Vout | 400 | 1600 | mVpp | DC coupled outputs | ||
(Differential) | |||||||
Output Impedance (Differential) | Zout | 90 | 100 | 110 | ohm | ||
Rx_LOS Output Voltage – High | 2.4 | VCC | V | ||||
Rx_LOS Output Voltage – Low | 0 | 0.4 | V | ||||
RSSI Trigger-High | 2.0 | VCC | V | ||||
RSSI Trigger-Low | 0 | 0.8 | V | ||||
Parameter | Symbol | Min | Typ. | Max | Unit | |||
TX Disable Assert Time | T_off | 10 | us | |||||
TX Disable Negate Time | T_on | 1 | ms | |||||
Time to initialize, include reset | of | T_int | 300 | ms | ||||
TX_FAULT | ||||||||
TX_FAULT from fault to assertion | T_fault | 100 | us | |||||
RX_LOS Assert Time | 0.5 | us | ||||||
RX_LOS De-Assert Time | 0.5 | us | ||||||
RSSI Trigger Width | Tw | 450 | ns | |||||
RSSI Trigger Delay | Td | 0 | 150 | ns | ||||
Optical Signal During Time | 600 | ns | ||||||
I2C Access Prohibited Time | 100 | 500 | us | |||||
I2C Read Time | 150 | 200 | us | |||||
Registration Date | 2004/08/26(Year/Month/Date) |
---|---|
Buyer / Seller in EC21 | Seller |
Business Type | Manufacturer |
Year established | 2010 |
Employees total | 501 - 1000 |
Annual revenue | USD 5,000,001 - 10,000,000 |
Company | Chengdu Opto-data Technology Co., Ltd |
---|---|
Address | No.223 shujin road,Qingyang district,chengdu,ChinaCHENGDU SICHUAN 610015China |
Phone | 86 - 28 - 18615777025 |
Homepage | http://www.opto-data.com |
Contact | HARRY XIE / Project Manager |