There are 280 SFP from 96 suppliers on EC21.com
Related Searches : fiber optic , patch cord , fiber , fiber optic patch cord , media converter , sfp , fusion splicer
Supplier Info.
Report Item
Your report on Product(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
| Part No. | Data | Laser | ||||||
| Rate | ||||||||
| Fiber | Distance*Note1 | Optical | Bail | Temp. *Note2 | DDMI |
| Type | Interface | color |
| TMS-DRM5-85NCR | 125M/1.25G | 850nm-VCSEL | MMF | 550m | LC | Black | ST | NO | ||||||||
| TMS-DRM5-85DCR | 125M/1.25G | 850nm-VCSEL | MMF | 550m | LC | Black | ST | YES | ||||||||
| TMS-DR10-31NCR | 125M/1.25G | 1310nm-FP | SMF | 10Km | LC | Blue | ST | NO | ||||||||
| TMS-DR10-31DCR | 125M/1.25G | 1310nm-FP | SMF | 10Km | LC | Blue | ST | YES | ||||||||
| TMS-DR40-55NCR | 125M/1.25G | 1550nm-DFB | SMF | 40Km | LC | Purple | ST | NO | ||||||||
| TMS-DR40-55DCR | 125M/1.25G | 1550nm-DFB | SMF | 40Km | LC | Purple | ST | YES | ||||||||
| Note1: 550m with 50/125µm MMF, 10/40 Km with 9/125µm SMF | ||||||||||||||||
| Note2: ST: -5 ~ +75deg C; IT:-40 ~ +85deg C | ||||||||||||||||
| Regulatory Compliance | ||||||||||||||||
| Feature | Standard | Performance | ||||||||||||||
| Electrostatic Discharge | MIL-STD-883G | Class 1C (>1000 V) | ||||||||||||||
| (ESD) to the | Method 3015.7 | |||||||||||||||
| Electrical Pins | ||||||||||||||||
| Electrostatic Discharge | EN 55024:1998+A1+A2 | Compliant with standards | ||||||||||||||
| to the enclosure | IEC-61000-4-2 | |||||||||||||||
| GR-1089-CORE | ||||||||||||||||
| Electromagnetic | FCC Part 15 Class B | Compliant with standards Noise | ||||||||||||||
| Interference (EMI) | EN55022:2006 | frequency range: 30 | ||||||||||||||
| CISPR 22B :2006 | MHz to 6 GHz. Good system | |||||||||||||||
| VCCI Class B | EMI design practice required to achieve | |||||||||||||||
| Class B margins. | ||||||||||||||||
| System margins depend on customer | ||||||||||||||||
| host board and chassis design. | ||||||||||||||||
| Immunity | EN 55024:1998+A1+A2 | Compliant with standards. | ||||||||||||||
| IEC 61000-4-3 | 1kHz sine-wave, 80% AM, | |||||||||||||||
| from 80 MHz to 1 GHz. No effect on | ||||||||||||||||
| transmitter/receiver performance is | ||||||||||||||||
| detectable between these limits. | ||||||||||||||||
| Laser Eye Safety | FDA 21CFR 1040.10 and 1040.11 | CDRH compliant and Class I | ||||||||||||||
| EN (IEC) 60825-1:2007 | laser product. | |||||||||||||||
| EN (IEC) 60825-2:2004+A1 | TUV Certificate No. R50271605 | |||||||||||||||
| EN(IEC)60950-1:2006+A1+A11+A12 | ||||||||||||||||
| Component Recognition | UL and CUL | UL file No. E344594 | ||||||||||||||
| UL60950-1:2007 | (CB:JPTUV-053877 ) | |||||||||||||||
| RoHS2.0 | 2011/65/EU | Compliant with standards | ||||||||||||||
| Parameter | Symbol | Min | Max | Unit |
| Storage Temperature | TS | -40 | +85 | °C |
| Supply Voltage | VCC | 0 | +4 | V |
| Operating Humidity | 5 | 95 | % | |
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |||
| Operating Case Temperature | Tc | -5 | 70 | °C | |||||
| Power Supply Voltage | VCC | 3.14 | 3.3 | 3.47 | V | ||||
| Bit Rate | 100BASE | 125 | Mbps | ||||||
| 1000BASE | 1.25 | Gbps | |||||||
| Supply Current | Icc | 450 | mA | ||||||
| Parameter | Symbol | Min | Typ. | Max | Unit | Notes | |
| Transmitter | |||||||
| CML Inputs(Differential) | Vin | 500 | 2400 | mVpp | AC coupled inputs | ||
| Input Impedance (Differential) | Zin | 100 | ohm | Rin > 100 ohms | |||
| @ DC | |||||||
| Tx_DISABLE Input Voltage – High | 2 | Vcc | V | ||||
| Tx_DISABLE Input Voltage – Lo | 0 | 0.8 | V | ||||
| Tx_FAULT Output Voltage – High | 2 | Vcc | V | ||||
| Tx_FAULT Output Voltage – Low | 0 | 0.8 | V | ||||
| Receiver | |||||||
| CML Outputs (Differential) | Vout | 700 | 1600 | mVpp | AC coupled outputs | ||
| Output Impedance (Differential) | Zout | 100 | ohm | ||||
| Rx_LOS Output Voltage – High | 2 | V | OC output, should be | ||||
| pull up with 4.7K – 10 KΩ | |||||||
| on the host board | |||||||
| Rx_LOS Output Voltage – Low | 0 | 0.5 | V | ||||
| MOD_DEF ( 0:2 ) | VOH | 2.5 | V | With Serial ID | |||
| VOL | 0 | 0.5 | V | ||||
| Parameter | Symbol | Min | Typ. | Max | Unit |
| TX Disable Assert Time | t_off | 10 | us | ||
| TX_DISABLE Negate Time | t_on | 1 | ms | ||
| Time to initialize, include reset of TX_FAULT | t_init | 300 | ms | ||
| TX Fault Assert Time | t_fault | 100 | us | ||
| TX Disable to reset | t_reset | 10 | us | ||
| LOS Assert Time | t_loss_on | 100 | us | ||
| LOS De-Assert Time | t_loss_off | 100 | us | ||
| 3 |
| Registration Date | 2004/08/26(Year/Month/Date) |
|---|---|
| Buyer / Seller in EC21 | Seller |
| Business Type | Manufacturer |
| Year established | 2010 |
| Employees total | 501 - 1000 |
| Annual revenue | USD 5,000,001 - 10,000,000 |
| Company | Chengdu Opto-data Technology Co., Ltd |
|---|---|
| Address | No.223 shujin road,Qingyang district,chengdu,ChinaCHENGDU SICHUAN 610015China |
| Phone | 86 - 28 - 18615777025 |
| Homepage | http://www.opto-data.com |
| Contact | HARRY XIE / Project Manager |