There are 39 micro stepper motor from 16 suppliers on EC21.com
Related Searches : motor , electric motor , ac motor , dc motor , induction motor , motors , gear motor
Price
Supplier Info.
Report Item
Your report on Product(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
15mm 18 deg micro stepper motor with reduction(gear ratio 1:20, 1:50)

Manufacturers of Permanent magnet(PM) Stepper Motor & PM Synchronous Motor:
1. PM Stepper Motor:
| Diameter | 8mm | 10mm | 15mm | 20mm | 25mm | 35mm | 42mm | 55mm |
| Model No. | PM8S-020 | PM10S-020 | PM15S-020 | PM20S(L)-020 | PM25S(L)-048(024) | PM35S(L)-048(024) | PM42S(L)-048 | PM55L-048 |
2. PM Stepper Motor with gearbox(with different gear ratio):
| Diameter | 10mm | 15mm | 20mm | 24mm | 25mm | 28mm | 35mm | 42mm |
| Model No. | PG10S-020 | PG15S-020 | 20BYJ46 | 24BYJ48 | PG25S-048 | 28BYJ48 | 35BYJ46; PG35L-048 | PG42L-048 |
3. PM Linear stepper motor(with lead screw):
| Diameter | 8mm | 10mm | 25mm |
| Model No. | PL8S-020 | PL10S-020 | PL25S-048(024) |
15mm gear stepping motor
Application :
HVAC/R Valve Actuation
Office Automation Printers, Copiers, Data storage
Medical Applications Pill dispensing Analysers
Telecommunication Antennae positioning Switching lines
Other Industries & Applications Robotics
Highlights :
Excellent open loop control - No encoders necessary
Digitally controlled - Easy to use with a micro processor
Cost effective - compact design, lower integration cost
Maintenance free - motor is brushless
Winding possibilities - Bipolar
General Specification :
| Item | Specification | ||
| Step Angle Accuracy | ±8%(full step, no load) | ||
| Resistance Tolerance | ±10% | ||
| Inductance Tolerance | ±20% | ||
| Temperature Rise | 80.C Max.(rated current,2 phase on) | ||
| Ambient Temperature | -20.C~+50.C | ||
| Insulation Resistance | 100MΩMin. ,500VDC | ||
| Dielectric Strength | 600VAC , 1s , 3mA | ||
Specification
| Model No. | Voltage(V DC) | No. of Phase | Step Angle(Deg.) | Gear Ratio | Winding Resistance(Ω) | Max. Pull-in Rate(PPS) | Pull-in Torque (g.cm) | Figure |
| PG15S-020-01/20 | 5 | 2 | 18/20 | 1:20 | 30 | 800 | 60 (at 350PPS) | 1 |
| PG15S-020-01/50 | 5 | 2 | 18/50 | 1:50 | 30 | 800 | 270(at 350PPS) | 1 |
| PG15S-020-90/50 | 5 | 2 | 18/50 | 1:50 | 30 | 800 | 300(at 500PPS) | 2 |
| PG15S-020-134/100 | 12 | 2 | 18/100 | 1:100 | 60 | 1100 | 500(at 350PPS) | 3 |
| PG15S-020-122/210 | 5 | 2 | 18/210 | 1:210 | 10 | 1100 | 1200(at 500PPS) | 4 |
| PG15S-020-90/298 | 5 | 2 | 18/298 | 1:298 | 30 | 800 | 1000(at 300PPS) | 1 |
| PG15S-020-111/380 | 5 | 2 | 18/380 | 1:380 | 10 | 1100 | 2500 | 4 |
| PG15S-020-134/1000 | 12 | 2 | 18/1000 | 1:1000 | 60 | 1100 | 3000 | 3 |
Customization On Call
Coil Modifications - Resistance and Inductance.
Magnets - to yield higher linear force or reduced detent levels.
Higher Strength Plastics for higher impact forces.
Reduced or increased Detent Force to suit the application.
Screw - metric or imperial tips, length.
Special Flanges, Connectors, End of motion detection sensors.
Wire Harness - connectors, pins, lead length, shrink tubing.


| Registration Date | 2019/12/17(Year/Month/Date) |
|---|---|
| Buyer / Seller in EC21 | Seller |
| Business Type | Manufacturer |
| Year established | 2000 |
| Employees total | 101 - 500 |
| Annual revenue | USD 5,000,001 - 10,000,000 |
| Company | Changzhou Goot Motor-Tech Co., Ltd. |
|---|---|
| Address | Floor 3, Block B2, No.15 Innovation Bldg.,Hi-Tech Zone, Xinbei District,Changzhou 213022, CHINAChangzhouJiangsuChina |
| Phone | 86 - 519 - 85136366 |
| Contact | Dani Fang |