Specification
| Material |
| Housing |
Nylon, PBT (UL94V-0) |
| Color |
Black or other colors are available |
| Contacts |
Flat Pin:0.35mm thickness phosphor bronze plated |
| with 3u /6u /15u /30u /50u min hard gold |
| over 2.45um (100u ) nickel |
| Shielding |
0.2mm thickness brass with nickel plated |
Mechanical Efficiency
• Shielded
RJ-45 connector with integranted 10/100 orGigabit Ethernet magenitcs
• Complies
with IEEE802.3 standards and all 10/100/1000Ethernet specifications.
• Compatible
with a variety of 10/100Base-T transceiver ICsand Gigabit Ethernet transceiver
ICs.
• Jack
cavity conforms to FCC rules and rejlation Part 68 subpart F
• Intergrated
design conserves valuable board space
• Minimum
interwingding breakdown voltage of 1500 Vrms
• Adaptable,
modualr design provides higher reliability
• Operating
temperature:0 C to + 70 C
• Storage
temperature : -40 C to + 85 C
Mechanical Efficiency
Electrical Specifications @25 C
| 10/100 Base-T |
| Turns Ratio |
1CT:1CT ±3% |
| Inductance (OCL) Media side |
100kHz / 100mV rms with 8mA DC Bias : 350uH Min. |
| Insertion loss |
1MHz ~ 100MHz : –1.0dB Max. |
| Return loss (Load 100Ω) |
1MHz ~ 30MHz : –18dB Min. |
| 30MHz ~ 60MHz : –18 + 20Log(F/30MHz) dB Min.
|
| 60MHz ~ 80MHz : –12dB Min. |
| CM to CM Rejection |
1MHz ~ 100MHz : –30dB Min. |
| CM to DM Rejection |
1MHz ~ 100MHz : –35dB Min. |
| Cross talk (TX–RX) |
1MHz ~ 100MHz : –35dB Min. |
| Hipot (Isolation voltage) |
Input to output isolation 1500V rms Min., 60 sec. |
| 10/100/1000 Base-T |
| Turns Ratio |
1CT:1CT ±3% |
| Inductance (OCL) Media side |
100kHz / 100mV rms with 8mA DC Bias : 350uH Min. |
| Insertion loss |
0.1MHz ~ 1MHz : –1.1dB Max. |
| 1MHz ~ 65MHz : –0.8dB Max. |
| 65MHz ~ 100MHz : –1.0dB Max. |
| 100MHz ~ 125MHz : –1.2dB Max. |
| Return loss (Load 100Ω) |
0.5MHz ~ 40MHz : –18dB Min. |
| 40MHz ~ 100MHz : –18 + 20Log(F/80MHz) dB Min.
|
| CM to CM Rejection |
1MHz ~ 100MHz : –30dB Min. |
| CM to DM Rejection |
1MHz ~ 100MHz : –35dB Min. |
| Cross talk (TX–RX) |
1MHz ~ 100MHz : –30dB Min. |
| Hipot (Isolation voltage) |
Input to output isolation 1500V rms Min., 60 sec. |
TradeVerify
