Also buy in
- Electrical Equipment & Supplies
- Switches
- Pressure Switches
model: JCS-02H Pressure range: 50-410 bar
Mainly used in high & low pressure protecting the control for air conditioning cooling system of the domestic, commercial, automobile. It is also fit for the other equipment. Characters: Adopt Eng....
1.This gas pressure switch is designed to monitor gas pressure and activate switch contacts accordingly. 2.This pressure switch can be used autonormously or integrated into a multifunctional gas...
Fluid : LPG, LNG 220V/5A 0.4~3mbar, 2~10mbar, 2.5~50mbar, 30~150 mbar, 100~500 mbar Made in Korea
The A4s is a universal air pressure switch for the boiler and water heater, which pressure is 39 Pa for ON, and 60Pa for OFF. Unlike the traditional pressure switch, it can reduce temperature error...
Air Pressure Sensing Switch Description The A401 air pressure sensing switch is a single pole single throw normally open type switch with 2 forward terminals, which have 187#(4.8*0.5mm) and...
A2 is a negative pressure switch designed for the gas water heater with the latest patented technology, which can achieve good contact performance in a small space. The A2 series is a single port...
Features: - nominal pressure: 0 ... 6 bar up to 0 ... 600 bar - accuracy: 0.5 % FSO - 1 analog output and up to 2 contacts - display and housing rotatable - perfect for oxygen applications
The WFAR water flow indicators shall be installed on system piping as designated on the drawing and/or as specified herein. Water flow indicators shall mount on any clear pipe span of the appropriate...
The DS 233 is a differential pressure switch with digital display for non-aggressive gases and compressed air. Because of its compact and robust aluminium housing it is particularly suited for...
The DPS120 series pressure type supervisory pressure switches shall be installed on system piping as designated on the drawing and/or as specified herein. Switched shall be provided with 1/2” NPT...
The DPS40 series pressure type supervisory pressure switches shall be installed on system piping as designated on the drawing and/or as specified herein. Switched shall be provided with 1/2” NPT male...
Product Description Application The pressure controller is used for control pressure transmission power switch on/off based on the principle of instability jumping when the dish mental diaphragm is...
Low Pressure switch used to regulate minimal pressure that requires for normal functioning of RO membrane and systems.
High pressure switch used to regulate pressure avoiding tubes leaking and burning of RO booster pump.
SS104 Series Ulter-Thin Pressure Transducer Core Features 1, Plain end diaphragm at choice 2, External threaded nipple at choice 3, Gauge pressure & absolute pressure at choice 4, High precision,...
SS202 Series OEM Pressure Transducer For Clean Fluid Application 1,Hydraulic/Mobile Hydraulic 2,Pneumatic Systems 3,Food and Beverage Industry 4,Refrigeration Systems 5,Pumps and Compressors 6...
SS106 Series Oil-filled Pressure Sensor with thread Application 1,Petroleum, Chemical, Metallurgy, 2,Electric power, Aviation, Aerospace, 3,Medical equipment, Automotive, Refrigerator compressor 4...
SS100 Series Piezoresistive Pressure Transducer Core Application 1,Petroleum, Chemical, Metallurgy 2,Electric power, Aviation, Aerospace 3,Medical equipment, Automotive 4,Other industry process...
Outline Electronic Pressure Switch is a two-wire current loop to provide a corresponding pressure electrical signal control points. switch signals generated by high stability circuit to achieve...