Browse Related
- Smoke Detector
- Fire Alarm
- Smoke Sensor
- Fire Detector
- Heat Detector
Also buy in
- Security & Protection
- Firefighting Supplies
- Smoke Detector
Skype: firealarm87 /wechat : 15220176087 General Descriptions Conventional Reflective Beam Detector (hereinafter called the detector) is a non-addressable reflective infrared beam smoke detector is...
Equipment Function : The heat alarm & detector test tunnel is used to test directional dependence, static response temperature, response times test for fire alarm and detector. The equipment meets...
设备 功能 : 高温 警报和检测器测试隧道用于测试方向依赖性、静态 火灾报警器和探测器的响应温度、响应时间测试。这 设备符合 GB4716、EN 54-5、BS 5446-2 和 ISO 的要求 标准。标准测试隧道由隧道、加热器、冷水机、 温度控制系统、计算机等根据 标准规格和参数,我们使用快速响应的热电偶和 先进
设备 功能 : 烟雾报警器生产试验 隧道用于生产中的批量测试或校准烟雾报警器和探测器 过程。主要部件、气溶胶发生器和遮光度计完全相同 作为标准烟道,确保测试结果的高可靠性。气雾剂 烟箱中的浓度由微调的 PID 控制,以保持恒定 烟雾的 OBS 在 +/-0.004dB/m 的狭窄范围内。烟雾报警器生产试验
Equipment Function : The equipment is intended for gas alarm or Carbon monoxide alarm testing and calibration in mass production in advantage of its big volume. The equipment provides a sealed...
设备功能: 气溶胶发生器雾化 液态石蜡通过喷嘴进入气溶胶。它主要是为以下方面设计的 烟雾报警器及探测器的灵敏度及功能测试。SM210气雾剂 发电机包含一个无刷气泵和雾化器,用于雾化液体石蜡。 气溶胶的开/关由 20VDC 输入信号控制。工作时间和 时间间隔可在时间控制器上设置。 设备参数: 1
Equipment Function : The smoke heat detector test tunnel was designed for sensitivity test of Smoke or Heat alarms/detectors according to GB 20517、GB4715、GB4716、EN 14604、EN 54-7 、EN54-5、BS 5446-2...
Equipment Function : The smoke alarm production test tunnel was designed for batch test or calibration of sensitivity test of Smoke alarms or detectors. The basic work principle is compliance to EN...
•Power:DC 9V battery •battery life: 12~15months •Standby current: ≤7μA •Alarm current: <45mA •Alarm light: red light •Alarm sound pressure:>85dB; alarm signal /3M •Sensitivity:...
•Operating voltage:DC:9V~35V •Standby current:≤50uA •Alarm current: 40-50mA@DC24V •Alarm indication: red LED •Reset: power off or auto reset •Alarm output: Remote led for 2 wires •contact rating N/A...
Skype firealarm87 /wechat 15220176087 Conventional Smoke Detector, Operates by Advanced MCU Expert Algorithm Software. The detectors are photo-electronic detector uses a state of-the-art optical...
skype firealarm87 /wechat 15220176087 General The alarm is a battery operated smoke alarm,equipped with a photoelectric sensor, designed to alert you and your family to the dangers of smokeand...
1. Product Descirpition Wireless photoelectric smoke fire detection alarm (hereinafter referred to as "smoke detector") is a device that detects fire by sensing smoke. When smoke is generated and...
Hassle free alignment, built with digital guide display and laser beam pointing Employ single-ended design through reflective mirror Four ranges wide monitoring from 8-100 meters via encoder Three...
Place of Origin:Zhejiang, ChinaBrand Name:PEASWAYModel Number:PW-508Special Features:Anti Fire smoke alarmBattery lifetime:10 Years, 1yearColor:WhiteMaterial:Plastic ABSPower Supply:DC 3VProduct...
EN14604 smoke alarm alone use 9v battery Packaging & DeliverySelling Units:Single itemSingle package size: 10.5X10.5X4 cmSingle gross weight:0.075 kgPackage Type:Each unit with installation...
Instruction manual of C-6004 manual call point A. Features 1.Built-in product ID code 2. Using hardware and software filtering to improve the anti-interference ability of the manual call point...
General Conventional Fire Alarm Control Panel with four Zones Key Specifications/Special Features Four Style B (Class B) Initiating Device Circuits (IDCs). All zones accept two-wire smoke detectors...
General Description The stand alone smoke alarm is a battery powered independent photoelectric smoke alarm,it is able to quickly detect the smoke of fires, when the concentration exceeds its alarm...
Smoke Alarm with excellent stability and high-sensitivity . Key Specifications/Special Features Power Source: 9V Battery (included). Audio Alarm: ≥ 85dB/3m Temperature Range: 0â to...
Conventional Fire Alarm Control Panel with four Zones Key Specifications/Special Features Four Style B (Class B) Initiating Device Circuits (IDCs). All zones accept two-wire smoke detectors and any...
Smoke and Heat Detector FT-143 Relay output 4-wire The detector is photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area...
Smart wireless smoke sensor Model:YG200 Specifications With highly sensitivity and that is the necessary devices inhousehold security Working voltage: 9V (6F22) Key Specifications/Special...
Powered Photoelectric Smoke Alarm with excellent stability and high-sensitivity. Key Specifications/Special Features Power Source: 90VAC~ 270VAC, Battery backup (included). Audio Alarm: ≥...
Description AC Powered Plug-In CO/Gas Combination Alarm Model: CJ-GD502S-M Description The Alarm is an AC powered plug-in, carbon monoxide and combustible gas alarm that can be installed easily in...
Model: CJ-S102 Conventional Smoke Detector The device is photoelectronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be...
A battery powered photoelectric type smoke detector reduces nuisance alarms from cooking smoke and shower steam Easy access to detector batteries, no need to remove alarm from ceiling to change the...
Function 1.It gathers sense, alarm and dial. 2.Can save 4 groups telephone numbers. 3.After power cut off, the saved information will not lose. 4.Long-distance intermit alarm and...
1.it can connect 64 channels smoke/heat detectors 2.It can save 4 groups telephone number; 3.Two dial methods� tone(T) and pulse(P) is choice; 4.After power cut off, the saved information will not...
Function 1.Can save 4 groups telephone numbers and 1 group medical number. 2.After power cut off, the saved information will not lose. 3.Long-distance intermit alarm and dial. 4.Long-distance monitor...