Also buy in
- Security & Protection
- Firefighting Supplies
- Smoke Detector
Introduction of Explosion-proof point type smoke fire detector XDT-Y-01 explosion-proof point type smoke fire detector, non-code switch type (relay output) detector. Detector adopts infrared...
1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111133333333333333333333333333333333333333333333333333
Equipment Function : The heat alarm & detector test tunnel is used to test directional dependence, static response temperature, response times test for fire alarm and detector. The equipment meets...
设备 功能 : 高温 警报和检测器测试隧道用于测试方向依赖性、静态 火灾报警器和探测器的响应温度、响应时间测试。这 设备符合 GB4716、EN 54-5、BS 5446-2 和 ISO 的要求 标准。标准测试隧道由隧道、加热器、冷水机、 温度控制系统、计算机等根据 标准规格和参数,我们使用快速响应的热电偶和 先进
设备 功能 : 烟雾报警器生产试验 隧道用于生产中的批量测试或校准烟雾报警器和探测器 过程。主要部件、气溶胶发生器和遮光度计完全相同 作为标准烟道,确保测试结果的高可靠性。气雾剂 烟箱中的浓度由微调的 PID 控制,以保持恒定 烟雾的 OBS 在 +/-0.004dB/m 的狭窄范围内。烟雾报警器生产试验
设备功能 : 该设备用于烟雾 警报器或烟雾探测器采样测试。烟箱的结构是典型的 灵敏度烟雾试验箱结构如 UL 附录 B 规定 217第 8 版或 UL 268 类似。 它由以下项目组成: 一) 外 橱柜:由符合标准尺寸的外部级胶合板制成 湾) 内 隔间:由胶合板制成,符合标准尺寸 c) 循环 fan:DC 风扇供电的 DC 电源
Equipment Function : The smoke alarm production test tunnel was designed for batch test or calibration of sensitivity test of Smoke alarms or detectors. The basic work principle is compliance to EN...
Power:DC 9V battery Standby current: ≤ 8uA Alarm current: ≤ 45mA Alarm sound level:≥ 85dB/3M Sensitivity: 0.08-0.16dB/m Battery Availability: 12~15months/9Volt 6F22 battery (default)or up to 60...
•Power:DC 9V battery •battery life: 12~15months •Standby current: ≤7μA •Alarm current: <45mA •Alarm light: red light •Alarm sound pressure:>85dB; alarm signal /3M •Sensitivity:...
•Power:DC 9V battery •Battery life: 12~15months •Standby current: <8μA •Alarm current: <45mA •Alarm light: red light •Alarm sound pressure:>85dB(A)alarm signal /3M •Sensitivity:...
•Operating voltage:DC:9V~35V •Standby current:≤50uA •Alarm current: 40-50mA@DC24V •Alarm indication: red LED •Reset: power off or auto reset •Alarm output: Remote led for 2 wires •contact rating N/A...
Skype firealarm87 /wechat 15220176087 Conventional Smoke Detector, Operates by Advanced MCU Expert Algorithm Software. The detectors are photo-electronic detector uses a state of-the-art optical...
Skype firealarm87 / wechat 15220176087 4-wires Smoke Detector with sound and relay output, Operates by Advanced MCU Expert Algorithm Software. The detectors are photo-electronic detector uses a state...
skype firealarm87 /wechat 15220176087 General The alarm is a battery operated smoke alarm,equipped with a photoelectric sensor, designed to alert you and your family to the dangers of smokeand...
1. Product Descirpition Wireless photoelectric smoke fire detection alarm (hereinafter referred to as "smoke detector") is a device that detects fire by sensing smoke. When smoke is generated and...
Description CJ-F 1000 Series Conventional Fire Alarm Control Panel Model: CJ-F1004, CJ-F1008, CJ-F1016 The CJ-F1000 Series Conventional Fire Alarm Control Panel is a 24 volt, four, eight,...
GST Conventional Infrared Reflective Beam Smoke Detector Products Introduce: GST Conventional Reflective Beam Detector is a non-addressable reflective infrared beam smoke detector, which must be used...
Product Description Product nanme Mini Carbon Monoxide Detector Mode number CO-235 Sensor type Electrochemial sensor life 7years operating voltage 3V Lithum battery standby current <20ua Alarm...
General The device is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the...
A. Features 1.Automatic compensation function. It can be automatically compensated to improve the reliability of the smoke detector, such as external environment (temperature, humidity, dust, static,...
General Description The stand alone smoke alarm is a battery powered independent photoelectric smoke alarm,it is able to quickly detect the smoke of fires, when the concentration exceeds its alarm...
A. Features 1.Automatic compensation function. It can be automatically compensated to improve the reliability of the smoke detector, such as external environment (temperature, humidity, dust, static,...
FW6000 Intelligent Fire Alarm Control Panel (FACP) is the new-generation fire alarm control unit designed by our company for applications in small and medium projects. It is wall-mounted type and has...
Smoke Alarm with excellent stability and high-sensitivity . Key Specifications/Special Features Power Source: 9V Battery (included). Audio Alarm: ≥ 85dB/3m Temperature Range: 0â to...
Conventional Fire Alarm Control Panel with four Zones Key Specifications/Special Features Four Style B (Class B) Initiating Device Circuits (IDCs). All zones accept two-wire smoke detectors and any...
Model No: SC-2003A-D Product name: smoke detector Description: 1.Technique parameter: Respond the air: Coal gas, gas, liquefied petroleum gas. Report to the police the density: Coal gas: 0.1-0.5%...
Smoke and Heat Detector FT-143 Relay output 4-wire The detector is photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area...
Smart wireless smoke sensor Model:YG200 Specifications With highly sensitivity and that is the necessary devices inhousehold security Working voltage: 9V (6F22) Key Specifications/Special...
Battery Powered Photoelectric Smoke Alarm with excellent stability and high-sensitivity. Key Specifications/Special Features Power Source: 9V Battery (included). Audio Alarm: ≥ 85dB/3m Temperature...
Powered Photoelectric Smoke Alarm with excellent stability and high-sensitivity. Key Specifications/Special Features Power Source: 90VAC~ 270VAC, Battery backup (included). Audio Alarm: ≥...