Measuring Range Wholesale

DST 60 Series

reduced. The surface and interfacial tension results can be calculated quickly and automatically, and the measured data can be shown easily on the LCD display and printed out. Specification Model DST60 Manual type/ DST60 Auto type Measuring range 0 to 200 dynes/cm (mN/m) Accuracy ± 1 % Max. Capacity 100 grams Evaluation methods Du Nouy ring method Wilhelmy Plate method

[Related Keywords : Digital, Surface, Tension, Analyzer]

Auto Contact Angle Analyzer - Phoenix 600

measuring dynamic contact angles. The sample size would be no limited up to 12" wafer and 480 x 370 mm. The Phoenix600 system can guarantee to carry out the highly upgraded research for your special applications. Automatic and rapid data analysis and high-speed dynamic image capture. Auto calculation of surface energy and work of adhesion High-resolution and powerful image capture system Automat

[Related Keywords : analyzer, Contact, angle, Surface]

Auto Contact Angle Analyzer - Phoenix 300

measured data to various function and analysis for user's applications. Also, additional tools are available for user convenience. This software can run on Windows 98/ 2000/ XP and be portable as being operated in a Notebook PC via the USB port. Specification Max. Sample size (W x H x L) 200 x 50 x 8 (mm) Phoenix300plus : 250 x 200 Contact Angle range 0~180°, ±0.1° accuracy Dis

[Related Keywords : analyzer, angle, contact, auto]

Metal Flowmeter (SMC-1000)

range of the measurement ㆍWide variety of material available ㆍThis product is being used for local indication, and scale ㆍability is 10 : 1 ㆍSanitary design ㆍHigh accuracy ㆍOutput : DC 4-20mA, Alarm Pipe Size ㆍSocket : 1/2"∼2? " ㆍFlange : 1/2"∼4" Application Industries of food, beverage, petro-chemical, nuclear- powered, etc.

[Related Keywords : Flowmeter, Metal Flowmeter]

Torque Tube, Displacement Type Level Transmitter (SDT-420)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

measured values by using PC ( SIEMENS PDM S/W) or HART Communicator in Control Center where located far distance from site. It is also possible to be adjustment, operation, and control easily by using conventional remote keypad on site. Features: Possible to communicate with HART or SIEMENS PDM. Measurement range : 300~5,000mm. Process temperature : Wetted parts -40 ~ 450°C Process pressure

[Related Keywords : Transmitter, Displacement Type Level Transmitter]

Air Purge Type Level Transmitter (SLA)

Operating Principle The back pressure of air purge which is sensed by semiconductor piezoelectric element is converged into electrical signal and the level is measured. Range Max. 10m Process temperature 0°C∼50°C Process pressure ATM. Features ㆍCan be used with highly viscous liquids ㆍOn site or remote displays ㆍEasy maintenance ㆍNo moving parts Output

[Related Keywords : Transmitter, Air Purge Type Level, Transmitter]

Digital Temperature Controller

• Place of origin:  

  Korea

Measuring range Input impedance T/C and mV input : Min, 1MΩ DC V : 1MΩ Source tolerable resistance Thermocouple : Max. 250Ω, Voltage : Max. 2 kΩ Lead wire tolerable resistance R.T.D : Max. 150Ω / wire (notice : Identical conductor resistance between 3wires) Input tolerable voltage ±10V (T/C, R.T.D, Voltage : mV DC), ±20V(Voltage : V DC) Noise removal rate NMRR(Nomal mode)

[Related Keywords : Temperature Controller, Temperature regulator, PID Temperature controller, Controller]

Digital Level Meter

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Range : -196℃ ~ 40℃ - Voltage : 220Volt(Battery: 12Volt) - Size : 200*150*100mm - LCD Size : 115*65mm - Connection : DIN 43650 - Communication : 485 CABLE, WIFI - Printing Method : Serial Thermal Transfer printing Features Displays the usage liquid status and it can be used as storage tank and tank lorry attachment and portable measurement. Display by actual hours, minutes, seconds.

[Related Keywords : pressure meter, digital]

Refrigerator Tester

This equipment is to measure and test the refrigerator that runs by compressor. it is also called the temperature and humidity constant Temperature and Humidity Test Room. Even described as the constant temperature and humidity. it may be used in wide range from at low temperature with low humidity to at high temperature with high humidity. In addition to that, It. Applied Standard JIC C-960

[Related Keywords : refrigerator tester]

Compressor Lock Rotor Tester

Test Equipment for testing Refrigerant Compressors with locking rotors. While shaft is being locked, testing voltage, ampere, resistance of the compressor. Measured Items Comp.rocked Amper Tester Comp.rocked Voltage Tester PTC Tester OLP Tester Testing Range Amper LBP - 0~5Amper HBP - 0~200Amper Voltage LBP - 0~300Voltage HBP - 50~600Voltage

[Related Keywords : compressor lock rotor tester]

Compressor Calorimeter

measuring the performance of various compressors for air conditioners, such as secondary refrigerant system, brine system, gas refrigerant flowmeter system and liquid refrigerant flowmeter system. Among these measuring methods, secondary refrigerant system is most generally used. There is also a system that can test the durability of the compressor. Testing Range Amper : LBP - 0~5Amper HBP

[Related Keywords : compressor calorimeter]

A/C Calorimeter

measurement of the air flow on the room side only, is suitable to the application in the development of the new product. Applied Standard KS C 9306 Electrical Air Conditioner JIS B 8615 Test Methods for Package Air Conditioner JIS C 9612 Room Air Conditioner ASHRAE, ISO Standards Technical Specification CAPACITY : MAX 100,000KCAL/H(CHANGEABLE) TEMP RANGE: : -20°C ~ 60°C HUMIDITY :

[Related Keywords : calorimeter]

Phoenix HT

is suitable for various applications under any temperatures. The optic system is adjustable for fine image analysis and the software can analyze precisely the images. Specification Contact angle range 0~180 °, ±0.1 ° accuracy Temperature range 1200 °C Evaluation method Sessile Drop method Operating system Window 98/ XP Zoom 6.5 folds Focus Internal, ± 6 (mm)

[Related Keywords : Auto, Contact, Angle, Analyzer]