Apply Display Wholesale

Corn Dry Machine Maize Dry Machine

• Min. Order:  

  1 set

• Price:  

  USD 8

• Place of origin:  

  China

• Price Condition:  

  FOB Qingdao

• Supply Ability:  

  1000000

applied to controlling system, so that the working status of dryer can be displayed. It’s easy to handle with either automatic operation or manual operation. Failures will be recognized easily by displaying automatically so as to facilitate the rectify work, not only safe but also practical.5, There is no dead area left and the drying process is uniform. The machine is easy to sweep and it can

[Related Keywords : corn dry machine, maize dry machine]

Main Control Board 500CIM05 1MRB150077R1/B

• Min. Order:  

  5 Acre

• Price:  

  US$ 46

• Place of origin:  

  China

applied to any seven interrupt request lines. The board of directors is connected to the VME bus VG connector via two 160 pins, which 　　complies with IEC603 　　The VME64 extension displays an active VME bus interrupt request, 1MRB15004R0001 500CIM05 1MRB150077R1/B 500BIO01 1MRB150005R1/J GFD563A102 3BHE046836R0102 PFCA401SF 3BSE024387R4 SYN5201A-Z V217 3BHB006714R0217 PCD235B1101 3BHE03202

[Related Keywords : 500CIM05, 1MRB150077R1/B, 500CIM05 1MRB150077R1/B]

CNC Machining Polycarbonate

• Min. Order:  

  1 Piece

• Price:  

  US$ 20 ~ 999

• Place of origin:  

  China

Applications of Polycarbonate/PC Parts Architecture Polycarbonate sheet machining has good light transmittance, impact resistance, UV radiation resistance, dimensional stability and good molding processing performance of its products, which makes it have obvious technical performance advantages over inorganic glass traditionally used in the construction industry. Automobile industry CNC machined

[Related Keywords : polycarbonate cnc service]

Wall-mounted Type Electromagnetic Induction Heating Water Boiler for Warming

• Place of origin:  

  China

display the real-time temperature and set temperature range. The built-in chip can intelligently control the heating speed and output power, and can be flexibly adjusted according to the actual situation. Ultra-high temperature heating electromagnetic heating coils have been applied to manufacturers of plastic products, plastic films, pipes, profiles and similar industries, and have achieved good

[Related Keywords : Water Boiler]

Wind Turbine Coating and Painting Machine Manufacturer

• Min. Order:  

  1 Set

• Price:  

  US$ 500000 ~ 50000000

• Place of origin:  

  China

display screen operation section and a wi-fi operation part. Offshore Wind Turbine Coating Machine A machine used to coat offshore wind turbines with protective layers of paint or other materials to limit corrosion. Difference Between Onshore and Offshore Wind Turbine Coating and Painting Machines Difference Between Onshore and Offshore Wind Turbine Coating Machines Onshore wind turbine coating a

[Related Keywords : wind turbine painting]

Metal Casting Foundry Resin Sand Reclamation Recycling System Molding Processing Foundry Equipment

• Min. Order:  

  1 Set

• Price:  

  US$ 2800 ~ 60000

• Place of origin:  

  China

application of casting plant. It is mainly usedfor conveying the new sand, used sand, molding sand, coat and lime stone as well as the construction material,chemical industry and food processing for all granular or block shape material. 2. Multi-function vibration regenerator This regeneration machine is designed for the resin sand or silicate bonded sand regeneration. The main mode is vibratio

[Related Keywords : foundry equipment, sand reclamation machine, sand recycling equipment, sand reclamation process]

FITVAC Solution

• Place of origin:  

  Korea

applied the industry standards for pipe & fittings. It offers a quick, easy and immediate way for users to configure their systems. 02. Performance Silmulation After 3D modeling, the simulation results of pump down time & throughput are displayed. Vacuum requirements(process apecifications) input by the user are also shown on each graph. The user easily knows whether the system meets the vacuum r

[Related Keywords : vacuum system]

CNC Aluminum Window Door Machine Double Head Cutting Saw

• Place of origin:  

  China

Product Description Aluminum Window Door Machine /Window CNC Cutting Machine/Double Head Cutting Saw Machine with Good Price Performances and Features --Applying to sawing sorts of aluminum profiles for doors/windows and curtain walls by cutting at angles 22.5º/67.5°,45º and 90º . --High quality servo motors are adopted. LCD touching display screen for operating control, through which the cu

[Related Keywords : Aluminum Window Door Mach]

0.35 - 1.6mm Automatic CNC Panel Bender Sheet Metal Bending Machine for Metal Plates

• Place of origin:  

  China

Display:MAZS flexible intelligent bending center bending sheet metal bending does not require molds, and can fold various complex shapes. It can fold complex shapes of various combinations such as right angles, non-right angles, arcs, upper and lower folds, and is used in the field of metal forming of different sheets in different industries. Application:MAZS metal sheet bender can be widely appl

[Related Keywords : CNC Panel Bender]

Multi Spindle Winding Machine

• Min. Order:  

  1 Unit

• Price:  

  US$ 20000

• Place of origin:  

  China

• Supply Ability:  

  20 SET

displayed on the monitor: model #, products name and related program name, executing state, number of loops, Spindle speed, production quantities, error description and etc. 5. The concept of DFM has been fully applied to the winding machine. So it has compact structure high rigidity, high intensity and maintenance friendly. . 6. Optimized design of winding fixture for quick changeover. 7.

[Related Keywords : COIL WINDING M ACHINE, TRANSFORMER WINDING, SMPS WINDING MACHINE, INDUCTOR WINDING MACHINE]

CNC Machining Copper

• Min. Order:  

  1 Piece

• Price:  

  US$ 20

• Place of origin:  

  China

applications that may be exposed to saltwater and other contaminants. 2. Pros and Cons of CNC Copper Parts Most CNC copper parts available today have specific advantages and disadvantages. Advantages Disadvantages In general, most CNC copper parts exhibit good machinability, ductility, and impact strength. They also display high thermal and electrical conductivity, corrosion resistance, and wear

[Related Keywords : CNC Machining Copper]

XYZ Axis Desktop Screwing Machine/Screw Assembly Machine

• Place of origin:  

  China

applied to a variety of common products . If the screw on the product specification is basically the same , you only need to replace the fixtures they can use the product . 3. monitor the entire quality of the equipment lock screw , in the event of bad touch will alarm and display the type of defective products . 4. Automatic clutch after the screwdriver reach the torque. 5. humane touch -screen

[Related Keywords : Desktop Screwing Machine, screw assembly machine, screwing machine, install screw machine]

Gear Type Liquid Level Transmitter (SGL)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

applied to wire decreases. When the level falls, buoyancy decreases and the load applied to wire increases. The front scale connected to float and wire through gear mechanism displays the level variation on the dial, and R/I converter outputs 4~20mA DC analog signal by using the built in potentiometer. Features: Remote and local indications are available. Easy to carry and install. Compactness of

[Related Keywords : Transmitter, Magnetostric Type Liner Level]

Ultrasonic Plastic Welding Machine

applied FET or IGBT and AVR device regardless loading condition. The most advanced digital generato The digital type generator is able to control precisely regardless environment variation or component error. (Applying 3 pieces of EPLD and 5 pieces of CPU) Digital type soft start and adjustment of 8 steps power raising speed Supplying the output almost linearly rather than steps prevents the dama

[Related Keywords : welder, engineering, machine]

Automatic Mold Taping Machine

display External air blower to clean the mold before input Mold in-feed by conveyor with max. Stand-by of 5 molds Antistatic belt conveyors Controllable conveyor speed Tape width of 12 to 30mm can be applied Automatic tape-end folding Easy Tape replacement LCD Monitor Display System in Clean Bench Specification Applicable Mold Diameter -TPM2000: Ø70mm~Ø81mm -ATM1000: Ø76mm~Ø8

[Related Keywords : Automatic Mold Taping Machine]