Place of origin:
China
The machine is suitable for the automatic gluing process of various passenger car steel backings for brake pads. The gluing mechanism adopts the upper and lower rubber roller to continuously feed and automatic gluing during rolling. The conveyor speed is variable frequency and adjustable. The automatic air drying area is automatically dried the steel backing glue by fans,which is easy to operate.
[Related Keywords : brake pad machine, brake pad grinding machin, brake pad making machine, brake pad production line]
Business Type
Manufacturer
Location
Henan, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Video
Min. Order:
1 Set
Price:
CNY 7600
Place of origin:
China
rollers for drive cleat (size of 16mm) or double seam(ACME) to replace the rollers of right angle lock without any difficulty. RF-12M RF-12M is featured of S cleat rollers. It has pittsburgh, double seam (ACME), as well as drive cleat (size of 28mm). RF-08S/RF-12S (BUTTON LOCK) Button Lock is the most popular lock former of HVAC workshop. The Button Lock roll former comes with "male" tooling on o
[Related Keywords : lock former, lock former machine, lock forming machine, duct machine]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Video
Min. Order:
1 Set
Price:
US$ 1111
Place of origin:
China
DN50-300mm): ✭ Continuous It is strength the machine ability in the length of tube and not restricted the tube length under certain conditions. ✮ High efficiency The machine can complete automatic rolling, welding, traction and cutting after the operator pressed the start button. This enables hands free. ✮ Cost saving One-step forming double-layer tube to save labor and reduce costs.
[Related Keywords : tube mill, pipe welding machine, hose forming machine]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Price Condition:
EXW SHENZHEN
to 300kbps Modem Synchronous HDLC : V.22bis, V.29 transmission speed: 1200/2400/9600bps Asynchronous : V.34, transmission speed 33.6Kbps, 56Kbps optional Support PPP communication, support SSLv2/3 TLSv1 Other communications Wireless GPRS / CDMA / Wi-Fi / GPRS & Wi-Fi, support SSLv2/3 TLSv1 Voice Peripheral Ports Li-battery Optional Li-battery 2150mAh, 7.4V. Support more than 40 hours standby t
[Related Keywords : bank, Credit Card, POS machine]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
Hong Kong
Price Condition:
FOB ShangHai seaport
Supply Ability:
5 Piece/Pieces per Month
Detailed Product Description Automatic ring making machine New technologies of ring rolling Ring size controlled by program High speed ring production ZGTEK's new generation of automatic ring making machine, the previous model is R-6-400. Easy to operate, you set the ring size in program, then that's it. Easy to maintain, servo motor system, regular lubrication would be enough. High speed, for 1
[Related Keywords : ring making machine, ring making, steel ring making, galvanized wire ring]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Video
Place of origin:
India
Durable and dependable! The M&B Banding rollers give you all the features you would expect from quality machines. heavy duty cast iron body slipout type bending rollers are specially designed for bending sheet into complete cylinders or curving them to suit different type of panel work equipped with a set of three miled steel properly machined roller, the front bottom roll has adjustment to suit
[Related Keywords : Bending Roller Machine, sheet rolling Machine, sheet bending Rollers]
Business Type
Manufacturer
Location
Gujrat, India
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Place of origin:
Korea
for Iron ore slimes 2. Reasonable price compared to other binders 3. Excellent early-age strength Compressive strength: 100kgf/cm2 min. 4. Natural drying or hot air dry are available 5. Excellent heat-resistant strength at 1000℃ min. We are also selling “Press type briquetting machine”. 1. Low capital compared to Roll tire type 2. Small space 3. Outstanding Briquette Strength
[Related Keywords : binder, iron ore slime, briquette]
Business Type
Supplier
Location
Gyeongsangbuk-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 360000
Place of origin:
China
China Quan Yue CNC Machinery Co., Ltd. Provide worldwide primarily for rolling bearing inner and outer rings, gear ring, pipe flanges, wheel hub, slewing, lifting conveyor rotating wheels, large containers strengthened circle, aircraft engine shell and other casing forgings, rolling carbon steel, stainless steel, titanium, copper alloys, aluminum alloys and high temperature alloys and other mater
[Related Keywords : .Hydrauic, Machinery, ring rolling machine, forging]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
High Speed Corrugated Roofing Roll Forming Machine is for making the corrugated roofing sheet in batch fully automatically, the speed can reach 50 to 60 meter per minute. The speed increased up by Invert and double hydraulic system. All Rollers are made of high quality material and gone under Taiwan vacuum heat treatment which makes them stronger and have long lifespan. https://www.ztrfm.com/high
[Related Keywords : Corrugated RoofingMachine]
Business Type
Manufacturer
Location
California, United States
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 3200
Place of origin:
China
to product development, production and sales. Our main products are: CNC Press Brake, Shears, Hydraulic press, Laser Cutter and CNC rolling machine these sheet metal processing equipments.we are using advanced technology from German, Japan, and Italy.we can produce large Hydraulic Press and Press Brake more than 16000 ton & 16m.we are with professional R&D team, and we have World-class design an
[Related Keywords : Plate Bending Rolls]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
501 - 1000
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
Korea
Forged work rolls for cold & hot rolling mill plant have less residual stress with special induction heating system for hardening. The surface hardness and hardening depth are adjusted corresponding to the customer's requirement. The rolls are machined with very precise accuracy or super finish mirror.
[Related Keywords : Work Rolls, Cold Rolling Mills]
Business Type
Manufacturer
Location
Busan, Korea
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 piece
Place of origin:
China
Price Condition:
FOB Shanghai
The centrifugal casting pipe can be applied in not only metallurgy industry but other appliance. 1. Furnace roller 2. Herth roll 3. Sink roll 4. Heat resistant roller Application: The various rolls/rollers are of good heat, corrosion, wear resistant properties, working at high temperature environment on average: 800 to 1, 200° C, which are used in the steel mills, like continuous annealing li
[Related Keywords : Bottom Roll, Furnace roller, Herth roll, Heat resistant roller]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
CNY 26000
Place of origin:
China
Supply Ability:
ex) 20 Set per Month
rolling stick, steel pipe, steel wire, steel ball, castings, forgings, cast iron, roll and blade, high-speed steel, tool steel, automobile axle, diesel engine gearbox, mining machinery, loader bridge arm and so on each kind of product quenching, annealing, tempering, heating, heat treatment. Box type annealing furnace by high temperature box furnace, temperature box furnace, low temperature box
[Related Keywords : annealing furnace, Box furnace, furnace, Box type annealing furnace]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
one set
Place of origin:
China
Price Condition:
FOB shanghai
Introduction Copper Rod Continuous Casting and Rolling line is used to produce diameter 8mm ETP copper rod or FRHC copper rod, it is equipped with different melting furnaces according to different raw material. 1. Main components reverberatory furnace or shaft melting furnace, rotary holding furnace, casting machine, roller shears, straightener, burr shaver, rolling mill with 12 stands, oil lu
[Related Keywords : Casting, Rolling, Copper Rod, Continuous]
Business Type
Supplier
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
5 Piece
Price:
US$ 1000
Place of origin:
China
Roller Cutters Litian raise boring cutters are designed and manufactured for all sizes of reaming heads. These rock roller drill bit cutters are used for different types of drilling from horizontal drilling, blind drilling to vertical drilling, etc. Different types of raise boring drilling tools have different advantages. Our kerf roller cutters are designed to achieve the best performance in all
[Related Keywords : Raise Boring Cutters]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Rolling Machine is Simple operation, the left and right spindle can be adjusted by data input between the roller tooth distance and tooth position, the size of the center distance of the left and right spindle can be adjusted by input data; ● Can be high rolling, the left and right spindle through their own independent servo motor drive, through synchronous control can eliminate tooth bias to a
[Related Keywords : Automatic thread rolling]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
and treated as same as bottom structure. (4). Feeding system:Working table with C-type mobile strong clamping arms to control and operate the sheet metal panel flexibly, or you can choose the mobile suction-cups plate to control and operate the sheet metal panel flexibly. (5). Worktable also has enough hard brushes and rolling stainless steel beads to protect sheet matel panel when processing .
[Related Keywords : CNC Panel Bender]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Piece
Price:
US$ 2500
Place of origin:
Indonesia
https://easyprinthead. com Product DescriptionPRODUCT HIGHLIGHTS Max Resolution: 2880 x 1440 dpiMax Print Width: 36"Print Speed: 22 x 34" Plot in 25 SecondsHandles Media up to 59 mil ThickHolds Two Rolls with 2" or 3" CoresFive-Color UltraChrome Pigment Ink SetControl Panel with Full Color LCDStand with Horizontal Catch BasketOptional Multifunction Scanning ModuleUSB 2.0 and Ethernet Connectivity
[Related Keywords : printing]
Business Type
Supplier
Location
Indonesia, Indonesia
Employees Total
Above 1000
Annual Revenue
More than 100,000,000
Min. Order:
100 Piece
Price:
US$ 150
Place of origin:
China
to make you feel comfortable after long hours of play or work. Thick cushioned backrests and seats bring this chair to the next level of comfort. Armrest and seat height adjustable; 90 ~ 170° tilt and sway; 360° rotating smooth PU leather, additional cushion, and waist pillow and headrest provide additional support and comfort. Sturdy base and nylon smooth rolling casters Are red white and blue
[Related Keywords : big tall outdoor]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 100
Place of origin:
China
Supply Ability:
Sufficient supply capacity
Cut to Length Machine Videos BOYA steel cut to length machine is often used in steel rolling production line. In the continuous rolling billet workshop or small section workshop, it is placed at the end of the rolling line to cut the rolled pieces into fixed length or only the head or end of cutting part. In cold and hot rolling workshops there are various types of flying shears used in the horiz
[Related Keywords : metal cut to length]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Competitive roll to roll products from various roll to roll manufacturers and roll to roll suppliers are listed above, please select quality and cheap items for you.
Besides, we also provide you with related products such as trademark, tagboard, tag, rubber belt, roll to sheet, pvc, pu, pet, opp, mylar, metal foil, label, kraft paper, electric, brown paper and automatic for your choice.
 |
Recommended Content
