Single Layer Wholesale

Liquid Packing Machine

This machine is widely used to pack liquids of low or high viscosity such as milk, bean juice, beverages, soy, sauce, vinegar and wine. It can automatically sterilize the film with ultraviolet radiation, form the bag, print the code, precisely fill the products and seal&cut at one time. Model: DXDL-500 and DXDL-1000 used single layer PE film as packing material, can use color printed compound fil

[Related Keywords : liquid packing machine, liquid filling machine, water bag machine, bag fill machine]

GRP Water Tank(Grp Panel Tank)

layer heat insulation panel minimize the heat losses and maintain its contents in its original form. The heat insulation panel with 3 layer structured filled with Poly-Urethane foam shows its best performance. capapcity Classification Temp. of Atmosphere -10°C -20°C -30°C 16ton single layer type 35 20 13.5 insulation type 164 81 58.5 1ton single layer type 11 6 4 insulation type 37.5

[Related Keywords : grp water tank, water tank, grp tank, water tanks]

Cast Film M.F.G Line

• Place of origin:  

  Korea

This Cast film production line is suitable for high functional and multi purpose film processing. Single & Multi layer cast film system is able to produce a wide variety of high clearer film with best optical features and greater out-put levels. System include Extruders, Feed block, T-Die equipped with an unique manual or automatic adjustment devices, Forming and Cooling roller in 2 or 3 polishin

[Related Keywords : Cast Film M.F.G, casing film manufacturing]

Hot Needle Micro Holes Perforation Machine for BOPP PE PP HDPE Film

• Min. Order:  

  1 Set

• Price:  

  US$ 35000

• Place of origin:  

  China

• Supply Ability:  

  16 sets per month

§ For perforating flower and vegetable packing films. Perforation device features : o Equipped with an electrostatic removing device to eliminate electrostatic problems. o Equipped with controller to ensure constant operating temperature at all times. o Hot pin is steel or stainless steel. Available Material : o PP, CPP, BOPP, HDPE, LDPE, PET,POF,EVA,medical tape and single layer film. Option

[Related Keywords : micro perforation machine, perforation machine, machine]

Tube Mill

• Min. Order:  

  1 Set

• Price:  

  US$ 1111

• Place of origin:  

  China

1). Tube mill welding diameter: DN8-150mm and DN50-300mm, customized. 2). Tube mill applies to thickness of 0.15-1.2mm 3). Welding Speed of tube mill: 1.5-3m/min 4). FUGE tube mill is installed with auto cutter. Tube Welding is a necessary step for hose making . At present, most Tube Mill is use for single-layer tube on the market. If you need double-layer tube , the manufacturer will put one si

[Related Keywords : tube mill, pipe welding machine, hose forming machine]

Decanter Centrifuge for Sludge Dewatering

• Min. Order:  

  1 Set

• Price:  

  US$ 16800

• Place of origin:  

  China

• Supply Ability:  

  100sets

single process is extremely beneficial in many applications where there is value in recovering a particular product or products from a multi-phased mixture.What Industries Do They Benefit?Tricanter centrifuges are useful separating solids and two liquids of different densities, and are valuable components of the tank cleaning, oil processing, metal recycling, and hemp industries just to name a fe

[Related Keywords : decanter centrifuge, 2 phase decanter, 3 phase decanter]

Medium Frequency Induction Heating Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

single-chip microcomputer, this medium frequencty induction heating series can effectively monitor the temperature, current, voltage, water flow, etc. of the main components of the equipment. Problems like overvoltage, undervoltage, overtemperature, water shortage, phase failure, and overcurrent can be easily detected. With different output modules, MFS series induction heating power supplies can

[Related Keywords : induction heating machin]

Steel Structure Base WH-S90/4

• Place of origin:  

  China

single base cantilever arm can be used 6. Applicable to I-beams with flange width ranging from 75-300mm 7. 2 through bolts must be installed crosswise 8. Material carbon steel surface hot-dip galvanizing (zinc layer thickness 55um) 2. single set of accessories Product name Specifications I-beam flange width (B) Bolt hole spacing (C) Floor width (D) Surface Unit Amount Steel base WH-S90/4 200 75-1

[Related Keywords : Steel Structure Base]

Aluminum Strip for Heat Exchangers Aluminum Fin Stock for HVAC

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

Clad strip/Fin/Thick strip/plates I. D.: 150 200 250 300 400 500mm O. D.：2000mm Coil: thick 0.04~4.0mm, width 8~1500mm Sheet: thick 0.4~4.0mm，width 450~1500mm Clad ratio: 4% up to 30% Nos. of clad layer: Single layer, double layers, multi-layers Tolerance of clad ratio: Cladding thickness of 4~6%:±1.5% Cladding thickness of 6~12%:±2% Cladding thickness of 12~16%:±2.5% Cladding thicknes

[Related Keywords : Liquid cooling plates]

Two and A Half Layer Forming Fabric for Bottom Wire

• Place of origin:  

  China

Layer Material CXW3645F Two and A Half Layer Polyester&Nylon Product Feature There are SSB triple layers,2.5 layers,1.5 layers,single layer forming fabric used for forming section of paper machine.This Two and A Half Layer Forming Fabric for Bottom Wire is 2.5 layers forming fabric structure, and it is with good dewatering,good dimensional stability and long service life. Product Application Th

[Related Keywords : Forming Fabric]

TIO2 Al2O3 ALD Atomic Layer Deposition Optical Coating Equipment ISO

• Place of origin:  

  China

layer Al2O3 Decorative Coating Colored film, metallized film Al2O3, TiO2 Anti-discoloration coating Precious metal anti-oxidation coating Al2O3, TiO2 Optical films High-low refractive index MgF2, SiO2, ZnS, TiO2, Ta2O5, ZrO2, HfO2 Working Principle Atomic layer deposition (ALD) is a method of depositing the substances on the surface of substrate in the form of single atomic film layer by layer. A

[Related Keywords : Optical Coating Equipment]

Clothing Machine Auto Feeding Fabric Laser Cutting Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 3200

• Place of origin:  

  China

automatic cutting, automatic sealing * Automatic typesetting, cutting accuracy of 0.2mm, fabric utilization rate of 98% or more * US automatic camera layout system, after the film can be reused * Single-layer cutting and multi-layer cutting for optional, customized shaped, only click the keyboard is ok, Perfect after-sales service system, can provide overseas international service

[Related Keywords : Laser Cutting Machines]

Automatic Litho Laminator Machine 20kw 150-800gsm 1700mm

• Place of origin:  

  China

then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product. Paste paper --- 180 ~ 800g/m thin paper, cardboard. Bottom paper---0.5~10m/m paperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board. Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.

[Related Keywords : Litho Laminator]

Metal Bond Diamond Wheel

• Min. Order:  

  1 Barrel

• Price:  

  US$ 1

• Place of origin:  

  China

single layer of nickel, Henan E Grind Abrasives Co., Ltd's electroplated tools can provide a long service life and excellent cutting ability. Dicing Blade & Grinding Wheels For Semi-Conductor Diamond tools play a great role in semi-conductor processing from a wafer to a single chip, Henan E-Grind Abrasives Co., Ltd can provide world-class dicing blades & grinding wheels for semi-conductor industr

[Related Keywords : metal bond diamond wheel]

Hot Moulding Hydraulic Press for Carbon Fiber 100t

• Min. Order:  

  1 Unit

• Price:  

  US$ 1000 ~ 10000

• Place of origin:  

  China

• Supply Ability:  

  500 units/per year

certificateHot Moulding Hydraulic Press for Carbon Fiber Characteristics1. It is suitable for two-layer molds and has high production.2. Adopt single power but respective oil circuit design which is characterised by stable working, low noise level and little fault.3. It is functioned by precise and safe mold straightening slowly.ApplicationSuitable for hot forming carbon fibres sheet.

[Related Keywords : hydraulics, Hydraulicpress, Forging, Moulding]