Min. Order:
15 Bag
Price:
US$ 85
Place of origin:
China
control system, ensure that there is no possible malfunction in the output monitoring control device. 6.9.4 Prohibition of use. If the drive is inactive due to the following reasons, the STO function must not be used Reason: --Cleaning, maintenance, and repair operations, prolonged inactivity: In this case, the entire system should be manned and secured (main switch). --Emergenc
[Related Keywords : SYN5201A, 3BHB006714R0217, SYN5201A-Z V217 3BHB00671]
Business Type
Supplier
Location
Shanxi, United States
Employees Total
501 - 1000
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
Static mixing Glue Viscosity Lower than 20000 CPS(mPa·s) Control mode PLC + Touch Screen Control system Independent R&D Measuring mode Stepping motor/High-precision, wear-resistant, long-life Gear pump Working voltage AC 220V 50Hz/60Hz Power requirement 3.55KW Air pressure requirement 4.5-8KG Machine Dimension 1500(L)*1200(W)*1500(H)mm Weight approx 260 KG Work environment Humidity: 20%~98%RH; T
[Related Keywords : Silicone Dispensing Machine, glue potting machine, epoxy resin mixing, pu dispenser]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Video
Min. Order:
1 Set
Price:
US$ 70000~80000
Place of origin:
China
Supply Ability:
10 Set/ Sets per Month
control button switch should be turned on and the adjustment button switch should be in a reset state before it can officially work, otherwise the feeding switch and mold fault signal will lose control. 6. During the formal punching process, due to the variation of the static error rate of the main motor with different loads, an electromagnetic counter set on the control board can be used to corr
[Related Keywords : 65 Ton Punching Machine, Crystal Head Chip, High-Speed Punching]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Video
Min. Order:
1 Set
Price:
US$ 70000~80000
Place of origin:
China
Supply Ability:
10 Set/ Sets per Month
control button switch should be turned on and the adjustment button switch should be in a reset state before it can officially work, otherwise the feeding switch and mold fault signal will lose control. 6. During the formal punching process, due to the variation of the static error rate of the main motor with different loads, an electromagnetic counter set on the control board can be used to corr
[Related Keywords : C-type high-speed press m, automotive connector high, 25T high-speed press mach]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Video
Min. Order:
1 Set
Price:
US$ 70000~80000
Place of origin:
China
Supply Ability:
10 Set/ Sets per Month
control button switch should be turned on and the adjustment button switch should be in a reset state before it can officially work, otherwise the feeding switch and mold fault signal will lose control. 6. During the formal punching process, due to the variation of the static error rate of the main motor with different loads, an electromagnetic counter set on the control board can be used to corr
[Related Keywords : High speed punch press, high speed punching machi, High speed punch manufact]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 1000
Place of origin:
China
Supply Ability:
2,500 sets per year
control to verify and set the structure and parameters accurately in the proofreading link of the entire driving system, so as to further improve the positioning accuracy and moving precision of the workbench drive; 2. It has good stability, and the workbench has a strong anti-interference capability to maintain a stable running speed after the accurate calculate of load and inertia; 3. The servo
[Related Keywords : Medium-Speed Wire-Moving Linear]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Supply Ability:
30 set/month
Hongxin Copper-Based Automatic Welding Machine Product Introduction: Application: for various kind of copper-based products assembly Operation process: static contact→ Copper Dot →visual inspection→welding Related parameters: Production effeciency: 30 pieces/Min, can replace 5 workers station Programmable logic controller (PLC) is OMRON brand + pneumatic components is SMC brand + vibratio
[Related Keywords : Copper Based, Automatic Welding Machine, Welding Machine]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 1000000
Place of origin:
China
control, alarm and other functions; Winding adopts shaftless clamping and rewinding structure, the press roll is controlled by hydraulic system, push arm automatically push material, automatic tipper hydraulic discharge is easy to operate; A. Unwinding adopts static analogue ultrasonic wave (Taiwan Puliyuan); B. Automatic discharge device for waste edge cutting with round knife; C. Hydraulic auto
[Related Keywords : thermal paper roll]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
Supply Ability:
20000 tons/year
control and select parameters automatically. So we can ensure that each batch of rolls has consistent production process control. Every step is traceable by our Electronic recording system. Whether it is static casting or centrifugal casting, our products have excellent performance. 7 Horizontal Spin Casters (Centrifugal Machines)1 Unit 1.600 mm x 4.500 mm B.L.1 Unit 1.400 mm x 3.000 mm B.L.2 Uni
[Related Keywords : Cast Roll Rings, cast sleeves, Rollers for Section Mills, pipe mill roller]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
Supply Ability:
20000 tons/year
control and select parameters automatically. so we can ensure that each batch of rolls has consistent production process control. Every step is traceable by our Electronic recording system. whether it is static casting or centrifugal casting, our products have excellent performance. 7 Horizontal Spin Casters (Centrifugal Machines)1 Unit 1.600 mm x 4.500 mm B.L.1 Unit 1.400 mm x 3.000 mm B.L.2 Uni
[Related Keywords : cast rolls strip mill, high chrome cast rolls, icdp rolls hot rolling, HSS rolls for mills]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
Supply Ability:
50 per year
Controlling Method Siemens PLC + HM1 Drive Method Air Compressed Load Amplitude Test Range (Static) Pressure: +500~12,000 Pa (Continuous, adjustable) Suction: -500 ~ -7,200 Pa (Continuous, adjustable) Note: The test time and pressures can be adjusted during the test every time. Load Amplitude Test Range (Dynamic) Pressure: -2,500 Pa ~ +2,500 Pa Suction: -500 Pa ~ -7,200 Pa Frequency: 3~7 times /
[Related Keywords : solar panel test machine, mechanical load tester, pv module test machine, wind resistance tester]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 459
Place of origin:
China
This kind of sprayer adopts advanced technology and imported components. It has reasonable design and smooth powder delivery,special control of high voltage static electricity effectively solve the problem of high voltage spark and powder deposition at the gun nozzle, suitable for the planar and complex groove spraying. The products are widely used in hardware products, shelves,computers, monitor
[Related Keywords : Powder Coating machine, Coating Spray Machine, Coating Machine Price]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Piece
Price:
€ 1000
Place of origin:
Sweden
static holding, and tension control. These applications include ship main thrusters, oil top drives, rewinders, wind turbines, anchor windlasses, lifting winches, amusement equipment, and unwinding systems, among others. DELLNER BUBENZER's KD disc brakes are direct-acting, with hydraulic or air pressure applied and spring-released units. The braking force achieved is directly proportional to the
[Related Keywords : dellner bubenzer, dellner brakes, disc brakes, skd50]
Business Type
Supplier
Location
Shanghai, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
Taiwan
Model: TUS-500 Fast Super Dryer Capacity: 372 Liters Humidity Range: 10%-50% Recovery Time: Recovers to ≤ 20% RH within 2 hours after accessing door for 30 second or less. External Dimension: 88*90*53 cm (W*H*D) Internal Dimension: 83*79*48 cm (W*H*D) Door Type: Side by Side Glass Door Lock Type: Standard Hygrometer: German Digital TESTO Thermal Hygrometer Anti-static Glass, Anti-stati
[Related Keywords : baking over, n2 purge, desiccator, desiccant]
Business Type
Manufacturer
Location
Taiwan, Taiwan
Employees Total
11 - 50
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1
Price:
USD 1
Place of origin:
China
Price Condition:
FOB qingdao/ningbo
Supply Ability:
30
Control system Shanghai NC-Studio system (anti-jamming capability, system stability, high precision, good finish) Inverter Fuling inverter Drive system Leadshine 860Hdriver Triaxial transmission X, Y-axis rack gear; Z-axis ball screw drive imported from Germany; (high precision, speed) Electrical components Domestic brand-name appliances, according to the plant supplier selection; (the part stab
[Related Keywords : CNC TOUTER, WOOD CNC ROUTER, FURNITURE CNC ROUTER, CRAVING MACHINE]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 1000 ~ 10000
Place of origin:
China
Basically the movement of a Tumbler Screening Machine can be compared to natural hand screening. For the control screening, fractionating and de-dusting of dry, powdered and granular products. Particularly suitable for high feed rates and multi-deck separations of fine, lightweight products which are difficult to screen. Material: The Ultimate Tumbler Screening Machines machine could be made in a
[Related Keywords : Screening]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 1000 ~ 10000
Place of origin:
China
static bonding between particles, promotes vertical movement, and increases capacity and efficiency. Ultrasonic vibration is controlled independently to the three dimensional vibration generated by the motor. The details for Ultrasonic System Technical data Installation data l Max ultrasonic power: 50 Weff 100 Weff or 200 Weff l Output voltage: 600 Veff (limited) l max. output current: 1.0 A (lim
[Related Keywords : Screen]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 172
Place of origin:
China
control module with max 32 IO modules (32*8=256 channels) Free progrm softwareSupport OpenPCS software, follow IEC 61131-3, the software is free with GCAN-PLC Without specialized downloaderGCAN-PLC can use common micro usb to complete debugging and downloading Total 2 communication modules PerformanceCANopen adapter (GCAN-IO-8000)Modbus adapter (GCAN-IO-8100)Node number1~1271~247Baud rate10Kbps~1
[Related Keywords : Support OPENpcs software, industrial programmable, Controlled by APP]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 251
Place of origin:
China
GCAN-PLC module is composed of a programmable control module (GCAN-PLC-400/510/511) and several I/O modules (GC-1008/2008/…). The control module has a variety of fieldbus communication interfaces that users can use to connect to the corresponding network and communicate with other devices. Total 3 control modules ModelCharacteristicCommunication busCPU frequencyProgram storageData storageGCAN-P
[Related Keywords : professional plc program, modular plc controller, with Ethernet interface]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 251
Place of origin:
China
GCAN-PLC module is composed of a programmable control module (GCAN-PLC-400/510/511) and several I/O modules (GC-1008/2008/…). The control module has a variety of fieldbus communication interfaces that users can use to connect to the corresponding network and communicate with other devices. Total 3 control modules ModelCharacteristicCommunication busCPU frequencyProgram storageData storageGCAN-P
[Related Keywords : professional plc program, modular plc controller, with Ethernet interface]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Competitive static control products from various static control manufacturers and static control suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
