Min. Order:
1 Set
Price:
US$ 1000
Place of origin:
China
Supply Ability:
999 Set/ Sets per Week
Coefficient of Friction Tester COF-01 is for the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tires. By measuring the smoothness of a product, the fastest running spe
[Related Keywords : friction tester, COF tester, ASTM D1984, plastic friction tester]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Video
Place of origin:
Australia
IDM’s Coefficient of Friction Testers have proven to be a fast, reliable and accurate method of determining coefficient of friction. Our range of COF Testers are used to determine the static and kinetic friction of plastic film, sheeting, paper and other sheeted material coatings. Their small bench top design makes it easy to use in a laboratory or setup out on the production floor for offl
[Related Keywords : friction, coefficient of friction, rub, heat]
Business Type
Manufacturer
Location
Victoria, Australia
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 2000 ~ 3500
Place of origin:
China
Standards: ASTM D1894 -01, ISO 8295 Function: This instrument can test the coefficient of friction of plastic film, thin sheet, paper and so on. Application: * Films rigid films, shrik films, stretch films, plastic films, plastic composite films, paper-plastic composite films,aluminized films, aluminum foil, aluminum composite films, high barrier films and many others. Eg. PET, OPP, CPP, LDPE, BO
[Related Keywords : Coefficient of Friction, COF, COF Tester]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Video
Min. Order:
3 Ton
Price:
US$ 3600
Place of origin:
China
Supply Ability:
10000 Tons/Month
friction coefficient, providing strong anti-slip protection even in wet or oily environments. Made of high-quality aluminum alloy (optional 3-series Al-Mn for cost-performance, 5-series Al-Mg for corrosion resistance), it retains good ductility for cutting, bending and welding, facilitating on-site installation. With stable surface flatness and wear resistance, it is widely used in industrial ope
[Related Keywords : checker plate, sublimation blanks, aluminium, aluminum alloy]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
More than 100,000,000
Video
Min. Order:
1000 Meter
Price:
US$ 0.8 ~ 2
Place of origin:
China
friction, dynamical friction coefficient: 0.2-0.3. 6, Heat shrink ratio: 1.7:1 ,longitudinal shrinkage: ≤8% Operating indexes 1, Max. Shrink temp.:260℃ 2, Operating temp.: -55℃~200℃ Up to standard: Approvals Meet SAE-AMS-DTL-23053/12 Application: 1, Cover the roller and idler wheel in machinery. ( Office machinery, printing and dyeing machinery, printing machinery, etc.) 2, Cover the roll
[Related Keywords : Insulation Cables Tube, PFA/FEP Heat Shrink Tube, FEP Thin Heat Shrink, FEP Heat Shrink Sleeves]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Video
Min. Order:
50000 Piece
Price:
US$ 4
Place of origin:
China
Supply Ability:
60,000 Set/ Sets per Month
Coefficient of friction control: Low friction surface treatments (e.g. plasma coatings) reduce the resistance to instrument insertion while avoiding seal gaps caused by wear. 2. Seal Structure Design Multi-stage sealing mechanism: Primary seal (dynamic seal): Resilient valves (e.g., petal valves, flap valves) for instruments of different diameters, which are required to maintain airtightness in t
[Related Keywords : Disposable trocar, Laparoscopic trocar, Surgical trocar, Hasson trocar]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
friction coefficient with the belt, self-lubricating, etc., which greatly avoids the defects of steel rollers and ceramic rollers, thereby greatly extending the service life of the belt and avoiding damage to the belt ; b. The design of non-metal rollers fully considers the use environment and user needs. It adopts an embedded combination design, which enables the roller to maintain better stabil
[Related Keywords : Non-metallic Rollers]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
51 - 100
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
Korea
Coefficient of friction Hardness (kg/mm2) NEOMOND-EP Before use 0.15 610 NEOMOND-EP After use 0.09 2100 NEOMOND-SW Product characteristics Particle size of polishing slurry: 3, 4.5, 6, 9㎛ Increased Material Removal rate(MRR) Improved surface polishing effect on sapphire wafers(Reduced surface roughness) Application field Sapphire wafer adrasive Expected effects NEOMOND-AS Product characteristic
[Related Keywords : polishing material, micro devices]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Place of origin:
China
Test items Unit Typical value Test method Thickness μm 35/40/45/50 GB/T6672 Thickness deviation % ±5 Tensile strength at break MD MPa ≧45 ASTM D-882 TD MPa ≧180 Elogation at break MD % ≧200 TD % ≧30 Heat Shrinkage MD % ≦40 Hot water 90℃/10s TD % ≧70 Friction coefficient μs / ≦0.55 ASTM D-1894 μk / ≦0.55 Haze % ≦6 ASTM D-1003 45°Gloss % ≧100 GB/T 8807 Surface Tens
[Related Keywords : petg]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
Above 1000
Annual Revenue
More than 100,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
1000sets/year
2.1 Turning thread (female/male thread, include special thread) on drill collar and drill pipe joint, tube coupling etc, diameter≤φ240 2.2 It is the 45°inclined machine bed, use heavy-duty roller straight-line guide rail, can bear heavy duty cut. It has the features of low friction coefficient, good dynamic property, good rigidity and stability, convenient to operate and remove chips, good wa
[Related Keywords : lathe machine, cnc pipe thread machine, pipe threading lathe, cnc lathe]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Square Meter
Price:
US$ 3
Place of origin:
China
Supply Ability:
2000square/day
Test Method Hardness 50±5 Shore A ASTM D2240 Specific Gravity 1.15 g/cm3 ASTM D792 Elongation ≥120 % ASTM D412 (150/22H)Compression Set ≤15 % DIN ISO 815-B lensile Strength >17 MPa ASTM D412 Tear Strength >10 Kg/m ASTM D624 Coefficient Of Friction 3-38 u ASTM D1894 Temperature Endurance -40~150 °C EN344 Dielectric Breakdown Voltage 15 KV/mm ASTM D149 RoHS PASS -- RoHS Any questions pls. co
[Related Keywords : KE951, silicon rubber, MYLAR mate]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
Korea
coefficient of expansion is low, this color is not the phenonmenon of peeling off. in addition, the White opacity and the gloss are good. This color can control the gloss and the transparency by mixing with Relief Flux 3015 3412 Ever Green (N) 3425 Yellow Green (C) : If you want to get more bright color, we recommend diluting as mixing with 3244. 3470 Teal Green (N) 3471 Grass Green (N) 3490
[Related Keywords : Onglaze color, pigment, ceramic color, decal]
Business Type
Manufacturer
Location
Seoul, Korea
Employees Total
1 - 5
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
test the UHMWPE pipeline is 4 times wear resistant than HDPE pipeline.By lining the UHMWPE pipeline in side the steel pipe, which can increse 6 times wear resistant ability. 3. Low water resistant, low friction coefficient, non scaling, save fuel engine cost, because the roughness of the UHMWPE pipeline is only 0.00022, while HDPE is 0.01 and steel is 0.1. By lining the UHMWPE Pipeline inside the
[Related Keywords : UHMWPE Dredging Pipe, UHMWPE pipe, UHMWPE Minging Pipe]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
More than 100,000,000
Place of origin:
China
coefficient of thermal expansion and the same temperature characteristics, thus having good temperature stability, resistance to effective deformation, good rigidity, and small dynamic geometric error deformation; Adopting a double-sided elevated dual drive dual reading head structure, the Y-axis deviation is reduced, ensuring the stability of the machine. The Y-axis transmission adopts a patente
[Related Keywords : measuring machine, UCC controller, AC-DMIS]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
Testing Calculations Module is available. This module provides a range of standard calculations, including tensile strength, Young’s modulus, yield point, among others, to thoroughly characterize and analyze material behavior. Additionally, an optional module for Coefficient of Friction (COF) Measurement is offered, expanding the capabilities of the force testers to meet diverse testing require
[Related Keywords : mechanical force gauge]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Place of origin:
China
friction and gravity from pulleys and strings used in traditional testing methods. Equipped with a limiting device and automatic return function. Real-time display of the test curve and peak value recording. Supports elongation rates of 50%, 100%, and 200%. Includes an embedded micro printer. Addition of a coefficient of friction function is optional. To test peel cling, two sample types are prep
[Related Keywords : Stretch Film Tester, Tensile Tester]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Kilogram
Price:
US$ 140
Place of origin:
China
D97 ℃ -51 -36 -36 -30 Density 0℃ 100℃ g/ml 1.93 1.75 1.94 1.76 1.95 1.77 1.95 1.78 Maximum volatilization ASTM D972 66℃ 121℃ 204℃ % in 22hr 1 3 - 1 2 10 <1 1 <5 - - <1 Oil seperation FTMS 791B 321.1 99℃ wt loss, %30hr 4 4 3 3 Four ball wear test ASTM D4172 20kg/107℃ 1200rpm/60min Scar, mm（+0.01）4 Friction coefficient （+0.003）4 0.4 0.07 0.3 0.07 0.3 0.08 0.4 0.08
[Related Keywords : PFPE]
Business Type
Supplier
Location
Sichuan, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Unit
Price:
US$ 9999
Place of origin:
China
coefficiency. Anti-condensation performance is improved by 20% tested based on ASTM D2247. 2. Environmental Consciousness and Antimicrobial Safety Upgraded by 5 levels With a formula made of environmentally friendly materials, the multi-colored Durkflex® FS series is completely free of toxins and other harmful substances. Antimicrobial capabilities have achieved Grade 0, the highest level of a
[Related Keywords : Colorful insulation, insulated material, elastomeric insulation, flexible insulation]
Business Type
Manufacturer
Location
Washington, United States
Employees Total
501 - 1000
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
friction coefficient, long service life and not easy to leak.Stainless Steel Locknut: Internal design of anti-loose, can be used for long time. customization The entire product can be customized just to meet your needs. Company Profiles Taizhou Yuehao Technology Co., Ltd. is located in Qinggang Industrial City, Yuhuan City, Zhejiang Province,in the centralpart of China's Golden Coast and the sout
[Related Keywords : Brass Ball Valve]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
in 24hours Low temperature -40°C,after 24hours in low temperature,then immediately free drop test from 1meter high to concrete, can not be fractured and damaged. Rolling Load,N ≥2500N Load capacity,KG ≥16344 Compression reststance Can bearable load 2500N,and will not break or damage Rebound rate 97% Shock absorption 55% Coefficient of sliding friction 0.54 Verticak deformation,mm 3.0mm
[Related Keywords : PP tiles]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Competitive friction coefficient test products from various friction coefficient test manufacturers and friction coefficient test suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
