Video
Min. Order:
1000 Meter
Price:
US$ 0.3~1
Place of origin:
China
HUS-135 Heat shrink tube HUS-135 Heat shrink tubing is a tube that shrinks radially when heated. It is widely used in industries such as electronics, automobiles, and aerospace, for electrical insulation and mechanical protection of wiring, corrosion protection of metal tubes, and many other applications. When heating a double-walled tube, the inner wall of the adhesive melts and flows to conform
[Related Keywords : Dual Wall Tubing, DWFR Heat Shrink Tubing, flame retardant heat tube, Dual Wall 4X Tubing]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
15 Metric Ton
Price:
US$ 180
Place of origin:
United Kingdom
Supply Ability:
10000
test 2 free sample 3 manufacture 4.factory price HDPE drum scrap 1.Hot water washed and no label, no any contaminant 2.dry and clear flakes 3.white,blue, red, yellow and so on 4.from drums Specification: HDPEUnitTypical ValueMass densityg/cm³0.941-0.959Melt flow Rate(190 Centigrade /2.16kg)g/10min≤1.0Tensile yield strengthMPa≥19.0Flexural modulusMpa≥965Elongation@ break%≥400Impact Embrit
[Related Keywords : HDPE blue, Drum Plastic Scraps, Recycled Blue HDPE, Blue HDPE Scraps]
Business Type
Supplier
Location
Woodford, United Kingdom
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
20 Ton
Price:
US$ 1150
Place of origin:
Korea
Supply Ability:
15000 ton yearly
Test Method Unit Result Specific Gravity ASTM D792 - 0.96 1.06 1.14 1.22 Tensile Strength ASTM D638 kg/cm2 290 300 310 280 Tensile Elongation ASTM D638 % 60 40 30 52 Flexural Strength ASTM D790 kg/cm2 350 410 430 400 Flexural Modulus ASTM D790 kg/cm2 16000 23000 33000 35000 Impact Strenth Izod, Notched ASTM D256 kg, cm/cm 10 7 5 4 Melt Flow Rate ASTM D1238 g/10min (250°C/2.16KGF) 10 10 10 9 Heat
[Related Keywords : TALC ALLOY]
Business Type
Manufacturer
Location
Gyeongsangbuk-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
5 Metric Ton
Price:
US$ 1100 ~ 1120
Place of origin:
China
Supply Ability:
500 tons per month
Test Method Test Condition Units Typical Values Physical Melt Flow Rate ASTM D-1238220ºC, 10Kgg/10min50Specific Gravity ASTM D-79223ºCg/cm31.2Ash -800ºC,30min%-Mechanical Tensile StrengthASTM D-63850mm/minMPa40Elongation at BreakASTM D-63850mm/min%25Flexural Strength ASTM D-7902mm/minMPa60Flexural Modulus ASTM D-7902mm/minMPa2100Impact Strength, IZOD non-notchedASTM D-25623ºCKJ/m2--30ºCKJ/m2
[Related Keywords : ABS Resin, ABS Granules, ABS Pellets, ABS]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
6 - 10
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Ton
Price:
US$ 900
Place of origin:
China
Supply Ability:
150ton per month
of Value/unit Test standard The density of1.04 g/cm³ISO 1183The density of1.04 g/cm³ASTM D792Melt mass flow rate (MFR) 200 ºC/5 Kg46 g/10 minASTM D 1238200 ºC/5 Kg46 g/10 minISO 1133Mechanical properties of Value/unit Test standard The tensile strength The yield (yld)4.9 MpaASTM D638The yield (yld)4.9 MpaISO 527-2Tensile elongation The yield (yld)3%ASTM D638The yield (yld)3%ISO 527-2
[Related Keywords : GPPS, Melt Flow Rate, Plastic Pellets]
Business Type
Supplier
Location
Tianjin, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Min. Order:
5 Metric Ton
Price:
US$ 700
Place of origin:
China
Supply Ability:
800 tons per month
Tests Value Unit Melt Flow Rate (MFR)2.0±0.4g/10minDensity920±2Kg/cm3Tensile Strengthat Yield8Mpa ≥Tensile Strengthat Break12Mpa ≥haze15%≤2, LLDPE for Master Batch Use Tests Value Unit Melt Flow Rate (MFR)20g/10minDensity0.924g/cm3Tensile StrengthMD12MpaTD 10Elongation at Yield13%Elongation at Break200Dark Drop Impact105gBrittle Temperature(F 50)-70CVicat Softening Point90C3, LLDPE Powde
[Related Keywords : LLDPE, LLDPE Resin, LLDPE Granule, LLDPE Pellet]
Business Type
Supplier
Location
Kwun Tong, Hong Kong
Employees Total
11 - 50
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
Melting Point: 144～146℃ Test Method: HPLC-DAD / HPLC-ELSD CAS.No.: 26833-87-4 Functions: Test Condition: Methanol-0.01mol·L-1 buffer stock solution(bulk factor：40:60) as mobile phase,flow rate：1.0mL·min-1,test wavelength：288nm (for reference) Storage: 2-8°C, keep container tightly in a dry place, out of light. Shelf Life: 2 Years Package: 20mg, 50mg, 100mg, 1g, 10g, 100g, 1kg
[Related Keywords : cephalotaxine, harringtonine, homoharringtonine]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Gram
Price:
US$ 600
Place of origin:
China
Melting Point: 144～146℃ Test Method: HPLC-DAD / HPLC-ELSD CAS.No.: 26833-87-4 Functions: Test Condition: Methanol-0.01mol·L-1 buffer stock solution(bulk factor：40:60) as mobile phase,flow rate：1.0mL·min-1,test wavelength：288nm (for reference) Storage: 2-8°C, keep container tightly in a dry place, out of light. Shelf Life: 2 Years Package: 20mg, 50mg, 100mg, 1g, 10g, 10
[Related Keywords : Homoharringtonine, HHRT]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
25 Metric Ton
Price:
US$ 820 ~ 850
Place of origin:
Thailand
Supply Ability:
1800 to 2000 MT monthly supply
Test MethodNominal ValueUnitDensityISO 11830.921g/cm3Melt Mass-Flow Rate (MFR)ISO 11331.9g/10minHardness Shore Hardness (shore D)ISO 86845 Mechanical Properties Tensile ModulusISO 527-2175MPaTensile StrengthYield, ISO 527-29.0MPaBreak,13.0MPaTensile Strain(Break)ISO 527-2850%Modulus of ElasticityInternal Method250MPaThermal Vicat Softening TemperatureISO 306/A5089.0°CMelting Temperature (DSC)DIN
[Related Keywords : Virgin Granules]
Business Type
Manufacturer
Location
Bangkok, Thailand
Employees Total
Above 1000
Annual Revenue
More than 100,000,000
Min. Order:
1 Ton
Price:
CNY 14600
Place of origin:
China
Supply Ability:
500000 Kilograms per Day
Test Method Unit Typical value Mechanical Properties Tensile Strength 50.0mm/minISO 527-1MPa60 Elongation At Break 50.0mm/minISO 527-1%>100 Flexural Modulus 2.0mm/minISO 178MPa2350 Flexural Strength 2.0mm/minISO 178MPa90 iZQd Notched Impact Strength 3.2mm/23°CASTM D256J/m750 Physical Properties Specific Gravity 23°C/H2OISO1183-1g/cm31.2 Mold Shrinkage 2mm flowISO294-4%0.4- 0.7 Melt Mass-flow Ra
[Related Keywords : PC, Polycarboneate, Engineering Plastics]
Business Type
Supplier
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
1 Unit
Price:
US$ 500
Place of origin:
United States
Melting point test, Flash point test, Prover, Flow meter, Pharmaceutical, Food, Dairy, Pete’s Plug, Viscosity, Portable, Digital, Inspector, Temperature Calibrator, Precision isplayLCD with 0.5 inch charactersTrend Indicating ArrowsLow Battery & Fault indicationResolution 0.1 or 0.01 User FunctionsAuto Off after 20 minutes or continuous operationLowest Reading, Highest Reading, Average ReadingS
[Related Keywords : TL3, Thermoprobe, Stem Thermometer]
Business Type
Supplier
Location
福建, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Melting Point Glass Powder TF-400C Coefficient of thermal expansion 10-7/°C 74.0±1 Density竊�/cm3竊�6.5±0.1 Transition temperature (Tg) 300±10°C Softening temperature (Tf) 380±10°C Flow pole dia 27.4±1.4mm Seal residual stress +50?200mu/cm Average particle size 4.4±0.6um 150 mesh Qualified 100% Color Yellowish Note:1. Glass average particle diameter produced by Japanese D
[Related Keywords : Glass Powder, Low Melting Point]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
Korea
testing: Immerse the fired color of decorated ware in 4% acetic acid (CH3COOH) for 24 hours by the automatic absorption spectroscopy. * Result of chemical resistance test ( Surface area : 0.1dm2, Volume : 35ml ) Color Number : 3150 (C) Red : Pb 0.3274 ppm, Cd 0,2351 ppm 3243 (N) Yellow : Pb 0.0889 ppm, Cd 0.0098 ppm 3313 (C) Mixing White : Pb 0.1375 ppm, Cd 0.0132 ppm 3366 (N) Mixing White
[Related Keywords : Onglaze color, pigment, ceramic color, decal]
Business Type
Manufacturer
Location
Seoul, Korea
Employees Total
1 - 5
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
100 Metric Ton
Price:
US$ 1000
Place of origin:
China
Supply Ability:
1000tons
sales hsmaosen com skyp...:rolandhuang888 Low-density polyethylene (LDPE ) is a thermoplastic made from the monomer ethylene. Low-density Polyethylene Resin (LDPE MFR=0.3g/10min ) Use :hand packing ,film packing peter at chinamaose dot com Specification SPECIFICATION OF LDPE PROPERTY UNIT SPECIFICATION TEST Melt Flow Index g/10min ≤0.3 ASTM D1238 Density g/cm3 0.922 ASTM D1505 tensile stren
[Related Keywords : LDPE Granules, LDPE Resin]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
501 - 1000
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
500 Meter
Price:
US$ 1.1
Place of origin:
China
Supply Ability:
60,000meter per day
TUV Wire Tinned Copper PV Photovoltaic EN50618 H1Z2Z2-K 1x10mm2 Solar Cable Solar cable PV1-F 10mm dc cable High quality PV1-F 10mm dc cable Features: 1) Electron beam cross-linked materials do not melt or flow, even at high temperature, high resistance against heat, cold,abrasion, UV, ozone and hydrolyses. 2) These cables provide the means to interconnect between photovoltaic(PV) panels and from
[Related Keywords : solar cable 10mm2, solar cable, Wire 10mm2, EN50618 solar cable]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
24 Metric Ton
Price:
US$ 250
Place of origin:
United States
ITEM STANDARD Melt Flow Rate(g/10min) 0.1 Density(g/cm3) 0.95 Power Ash% 0.01 Tensile Strength(MPa) 22 Elongation At Break% 600 Environmental stress-cracking 1500 We also have the following products: - HDPE Clear/Natural Regrind (clean and washed) - HDPE Clear/Natural Scrap Baled - HDPE White Regrind/Baled (clean and washed) - HDPE Milk Bottle Regrind - LDPE Film Baled 100, 98/2 and 95/2 - LDPE C
[Related Keywords : HDPE Drum Milk Bottle]
Business Type
Supplier
Location
New York, United States
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Piece
Price:
US$ 5000
Place of origin:
China
flow, the molten steel level must be kept stable. Otherwise, during the casting process, if the level will fluctuate too much, and slag will be involved, forming surface slag inclusion on the surface of the casting billet, affecting the quality of the billet. The test points out that the relationship between the level fluctuation and the depth of casting billet surface slag inclusion is as follow
[Related Keywords : mould level measurement, continuous casting strand, mold level control system]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Video
Place of origin:
China
flow (heat shrink tube)Resistance to environmental stress crackingASTM D1693No crackingDielectric strengthASTM D2671≥15 kV/mmVolume resistivityASTM D2671≥1.0×1014Ω·cmStorage period (40℃/336 h)--Outer diameter or length change rate≤2%Hot color dressing--The color-changing paint does not change color below 180℃, and the color-changing paint finishes changing color at 250℃Hot melt adh
[Related Keywords : fiber optic protector, heat shrink, Shrink connector, shrink tube]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Box
Price:
US$ 1
Place of origin:
China
Melting point 234~239 ℃ (BP) B、Infrared Absorption Conforms to the caffeine Reference Spectrum ( BP) C、Loss on drying See Tests ( BP) [Tests] Appearance of solution Clear、colourless (BP) Heavy metals ≤20ppm (BP) Sulphates ≤500ppm (BP) Related substances -Each impurity A、B、C、D、E、F ≤0.10% (BP) -Unspecified impurities ≤0.10% (BP) -Total impurities ≤0.1% (BP) Acidity
[Related Keywords : Caffeine, Caffeine Anhydrous, cosmetic, food additives]
Business Type
Supplier
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
More than 100,000,000
Min. Order:
1 Kilogram
Price:
US$ 9.5
Place of origin:
China
Supply Ability:
8 tons per day
N, S, P organics and ionic compound like Sn, As,Hg, Ph. (Do not smoke when you use this addition silicone rubber) ＊Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncured problem. P ackage: 1. 1:1 mix ratio: 20KG;25KG and 200KG Per drum S helf life: Twelve(12) months when stored under dry and cool place by original package under 25℃
[Related Keywords : RTV Silicone Rubber, addition cure silicone, heat resistant silicone, liquid silicone rubber]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Competitive melt flow testing products from various melt flow testing manufacturers and melt flow testing suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
